Water-soluble sulfonated phenolic resins. III. Effects of degree of sulfonation and molecular weight on concrete workability

Kung-Chung Hsu, Sheng Da Chen, Nan Su

研究成果: 雜誌貢獻文章

17 引文 斯高帕斯(Scopus)

摘要

The effects of the degree of sulfonation (DS) and molecular weight (MW) of sulfonated phenolic resins (SPF) on the flow properties of cementitious materials were investigated. SPF resin was prepared from phenol, formaldehyde, and sodium bisulfide through a four-step reaction. It was found that an increase in either DS of MW would enhance the dispersion effects in the system. The results indicate that the fluidity of cement pastes and the workability of concrete increased with higher DS until the resin was fully sulfonated. For resins with sufficient sulfonation, the performance of cementitious materials would increase with increasing MW. Apparently, resins with MW of about 3 × 104 are most effective in promoting concrete properties in terms of workability and compressive strength.

原文英語
頁(從 - 到)1762-1766
頁數5
期刊Journal of Applied Polymer Science
76
發行號12
DOIs
出版狀態已發佈 - 2000 一月 1

ASJC Scopus subject areas

  • Chemistry(all)
  • Surfaces, Coatings and Films
  • Polymers and Plastics
  • Materials Chemistry

指紋 深入研究「Water-soluble sulfonated phenolic resins. III. Effects of degree of sulfonation and molecular weight on concrete workability」主題。共同形成了獨特的指紋。

  • 引用此