Ultrasonic dissimilar joining of aluminum alloy and polymer with the composite material of ABS polymer doping carbonized rice husk

Chin Pao Cheng, Chun Hu Cheng, L. Wen Wang Yu-Chen Chen, Yang Sheng You

研究成果: 雜誌貢獻Conference article

1 引文 斯高帕斯(Scopus)

摘要

The metal housing is typically jointed with plastic fittings by conventional gluing method or embedding injection molding to produce this type of devices. We propose to improve this new technique with more practical approach. In plastic-aluminum substrate dissimilar joining, the 5052 aluminum plate coarsening process was performed to increase the porosity of the permeable dissimilar phase. The ABS polymer plus carbonized rice husk powder was later induced or deposited on the microstructure to improve the bonding effect. The plastic-aluminum substrate dissimilar joining is completed by the final step of ultrasonic welding. The finished substrate will be tested on the properties of tensile strength to ensure its quality. According to the simulation analysis and measuring results, the maximum temperature between the interface of ABS polymer and 5052 aluminum alloy is about 400~450 °C during ultrasonic welding, which can make the surface of ABS polymer to be melted. Furthermore, after drilling micro-hole array and covering ABS plus carbonized rice husk powder, the 5052 aluminum alloy shows better joining effect with ABS polymer sheet by ultrasonic welding. This improved approach does not require mold or injection molding machinery to produce the high quality plastic-aluminum bonding parts.

原文英語
文章編號06001
期刊MATEC Web of Conferences
130
DOIs
出版狀態已發佈 - 2017 十月 25
事件1st International Conference on Composite Material, Polymer Science and Engineering, CMPSE 2017 - Toyama, 日本
持續時間: 2017 六月 242017 六月 25

ASJC Scopus subject areas

  • Chemistry(all)
  • Materials Science(all)
  • Engineering(all)

指紋 深入研究「Ultrasonic dissimilar joining of aluminum alloy and polymer with the composite material of ABS polymer doping carbonized rice husk」主題。共同形成了獨特的指紋。

  • 引用此