Triple peaks plasmonic thermal emitter with selectable wavelength using periodic block pattern as top layer

Shao Yu Huang; Hung Hsin Chen; Hui Hsin Hsiao; Pei En Chang; Yi Tsung Chang; Chun Han Chen; Yu Wei Jiang; Hung Chun Chang; Si Chen Lee

doi:10.1109/LPT.2012.2188887

Triple peaks plasmonic thermal emitter with selectable wavelength using periodic block pattern as top layer

Shao Yu Huang^*
, Hung Hsin Chen
, Hui Hsin Hsiao
, Pei En Chang
, Yi Tsung Chang
, Chun Han Chen
, Yu Wei Jiang
, Hung Chun Chang
, Si Chen Lee

^*此作品的通信作者

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

7 引文斯高帕斯（Scopus）

摘要

A plasmonic thermal emitter with a periodic block pattern as the top layer was investigated. It is found that by adjusting the length and orientation of the rectangle metallic islands inside the block pattern, three polarization-dependent peaks can be obtained in the thermal radiation spectra. The individual mode can be extracted according to the different polarizations by an external polarizer. In addition, the device can be designed to emit in the desired wavelength range by tuning the dimensions of the block pattern.

原文	英語
文章編號	6182941
頁（從 - 到）	833-835
頁數	3
期刊	IEEE Photonics Technology Letters
卷	24
發行號	10
DOIs	https://doi.org/10.1109/LPT.2012.2188887
出版狀態	已發佈 - 2012
對外發佈	是

ASJC Scopus subject areas

電子、光磁材料
原子與分子物理與光學
電氣與電子工程

存取文件

10.1109/LPT.2012.2188887

其它文件與鏈接

引用此

@article{4faa02864c794d248670d565aeedfe33,

title = "Triple peaks plasmonic thermal emitter with selectable wavelength using periodic block pattern as top layer",

abstract = "A plasmonic thermal emitter with a periodic block pattern as the top layer was investigated. It is found that by adjusting the length and orientation of the rectangle metallic islands inside the block pattern, three polarization-dependent peaks can be obtained in the thermal radiation spectra. The individual mode can be extracted according to the different polarizations by an external polarizer. In addition, the device can be designed to emit in the desired wavelength range by tuning the dimensions of the block pattern.",

keywords = "Infrared, polarization, polarized thermal emitter, surface plasmon",

author = "Huang, \{Shao Yu\} and Chen, \{Hung Hsin\} and Hsiao, \{Hui Hsin\} and Chang, \{Pei En\} and Chang, \{Yi Tsung\} and Chen, \{Chun Han\} and Jiang, \{Yu Wei\} and Chang, \{Hung Chun\} and Lee, \{Si Chen\}",

note = "Funding Information: Manuscript received July 25, 2011; revised February 4, 2012; accepted February 13, 2012. Date of publication March 8, 2012; date of current version April 18, 2012. This work was supported in part by the National Science Council of the Republic of China under Contract NSC 100-2120-M-002-014.",

year = "2012",

doi = "10.1109/LPT.2012.2188887",

language = "English",

volume = "24",

pages = "833--835",

journal = "IEEE Photonics Technology Letters",

issn = "1041-1135",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "10",

}

TY - JOUR

T1 - Triple peaks plasmonic thermal emitter with selectable wavelength using periodic block pattern as top layer

AU - Huang, Shao Yu

AU - Chen, Hung Hsin

AU - Hsiao, Hui Hsin

AU - Chang, Pei En

AU - Chang, Yi Tsung

AU - Chen, Chun Han

AU - Jiang, Yu Wei

AU - Chang, Hung Chun

AU - Lee, Si Chen

N1 - Funding Information: Manuscript received July 25, 2011; revised February 4, 2012; accepted February 13, 2012. Date of publication March 8, 2012; date of current version April 18, 2012. This work was supported in part by the National Science Council of the Republic of China under Contract NSC 100-2120-M-002-014.

PY - 2012

Y1 - 2012

N2 - A plasmonic thermal emitter with a periodic block pattern as the top layer was investigated. It is found that by adjusting the length and orientation of the rectangle metallic islands inside the block pattern, three polarization-dependent peaks can be obtained in the thermal radiation spectra. The individual mode can be extracted according to the different polarizations by an external polarizer. In addition, the device can be designed to emit in the desired wavelength range by tuning the dimensions of the block pattern.

AB - A plasmonic thermal emitter with a periodic block pattern as the top layer was investigated. It is found that by adjusting the length and orientation of the rectangle metallic islands inside the block pattern, three polarization-dependent peaks can be obtained in the thermal radiation spectra. The individual mode can be extracted according to the different polarizations by an external polarizer. In addition, the device can be designed to emit in the desired wavelength range by tuning the dimensions of the block pattern.

KW - Infrared

KW - polarization

KW - polarized thermal emitter

KW - surface plasmon

UR - https://www.scopus.com/pages/publications/84860152964

UR - https://www.scopus.com/pages/publications/84860152964#tab=citedBy

U2 - 10.1109/LPT.2012.2188887

DO - 10.1109/LPT.2012.2188887

M3 - Article

AN - SCOPUS:84860152964

SN - 1041-1135

VL - 24

SP - 833

EP - 835

JO - IEEE Photonics Technology Letters

JF - IEEE Photonics Technology Letters

IS - 10

M1 - 6182941

ER -

Triple peaks plasmonic thermal emitter with selectable wavelength using periodic block pattern as top layer

摘要

ASJC Scopus subject areas

存取文件

其它文件與鏈接

指紋

引用此