Study on the fabricated feasibility of electrodes in EDM using rapid prototyping (RP) and investment casting technology

Qi Xuan Wu, Ming Chang Wu, Chih Chung Hu, Chun Yao Hsu, Tien Li Chang*, Chung Chen Tsao*

*此作品的通信作者

研究成果: 雜誌貢獻期刊論文同行評審

3 引文 斯高帕斯(Scopus)

摘要

This study fabricates a roughing electrode of electrical discharge machining (EDM) using a rapid prototyping (RP) system and investment casting technology, which reduces the overall time that is required for fabrication and the cost of the manufacturing process for a selected electrode. Pro/E (3D CAD) software is used to design the electrode prototype, which has a complex appearance, and to transform the CAD model into stereolithography (STL) format. An RP machine (Zcorp 402 3DP) is used to construct a gypsum-based powder model. After a sealing process using the permeation of resin, the water resistance and strength of the gypsum-based material are increased. The manufacturing process then involves creating a wax model with a gypsum electrode that is strengthened by resin permeation by casting a vulcanized silicone molding. The brass electrode is fabricated using investment casting technology. The results of an EDM test show that the brass electrodes with RP that are manufactured perform well and the total time that is required to machine the EDM electrode using RP is 15.8% less than the time that is required for a CNC machining process.

原文英語
頁(從 - 到)377-384
頁數8
期刊International Journal of Advanced Manufacturing Technology
109
發行號1-2
DOIs
出版狀態已發佈 - 2020 7月 1

ASJC Scopus subject areas

  • 控制與系統工程
  • 軟體
  • 機械工業
  • 電腦科學應用
  • 工業與製造工程

指紋

深入研究「Study on the fabricated feasibility of electrodes in EDM using rapid prototyping (RP) and investment casting technology」主題。共同形成了獨特的指紋。

引用此