Prediction surface morphology of nanostructure fabricated by nano-oxidation technology

Jen Ching Huang, Ho Chang, Chin Guo Kuo, Jeen Fong Li, Yong Chin You

研究成果: 雜誌貢獻文章

1 引文 斯高帕斯(Scopus)

摘要

Atomic force microscopy (AFM) was used for visualization of a nano-oxidation technique performed on diamond-like carbon (DLC) thin film. Experiments of the nano-oxidation technique of the DLC thin film include those on nano-oxidation points and nano-oxidation lines. The feature sizes of the DLC thin film, including surface morphology, depth, and width, were explored after application of a nano-oxidation technique to the DLC thin film under different process parameters. A databank for process parameters and feature sizes of thin films was then established, and multiple regression analysis (MRA) and a back-propagation neural network (BPN) were used to carry out the algorithm. The algorithmic results are compared with the feature sizes acquired from experiments, thus obtaining a prediction model of the nano-oxidation technique of the DLC thin film. The comparative results show that the prediction accuracy of BPN is superior to that of MRA. When the BPN algorithm is used to predict nano-point machining, the mean absolute percentage errors (MAPE) of depth, left side, and right side are 8.02%, 9.68%, and 7.34%, respectively. When nano-line machining is being predicted, the MAPEs of depth, left side, and right side are 4.96%, 8.09%, and 6.77%, respectively. The obtained data can also be used to predict cross-sectional morphology in the DLC thin film treated with a nano-oxidation process.

原文英語
頁(從 - 到)8437-8451
頁數15
期刊Materials
8
發行號12
DOIs
出版狀態已發佈 - 2015

ASJC Scopus subject areas

  • Materials Science(all)

指紋 深入研究「Prediction surface morphology of nanostructure fabricated by nano-oxidation technology」主題。共同形成了獨特的指紋。

  • 引用此