Optical characteristics of WO3 thin films prepared using the electrodeposition method

Tun-Ping Teng, Li Lin, Chao Chieh Yu

研究成果: 書貢獻/報告類型會議貢獻

1 引文 斯高帕斯(Scopus)

摘要

The tungsten oxide (WO3) thin films on the indium tin oxide (ITO) glass in this study were produced by applying the electrodeposition method (ED). This method involves adjusting ED time to control the structure, film thickness, and morphology of WO3 thin films. Furthermore, the crystallization of the WO3 thin films was controlled by annealing them at 200 °C and 500 °C. The results show that the WO3 coated glass with non-annealed and annealed at 200 °C has a high transmittance of visible light and anti-infrared characteristics. However, the WO3 coated glass annealed at 500 °C has high infrared transmittance, with the highest infrared transmittance reaching 85% at the 1000 nm wavelength. To improve the heat collecting efficiency of solar water heaters, the high infrared WO3 coated glass can be applied to the surface of the heat collecting component.

原文英語
主出版物標題Mechatronics, Applied Mechanics and Energy Engineering
頁面26-31
頁數6
DOIs
出版狀態已發佈 - 2013 十月 25
事件2013 International Conference on Mechatronics, Applied Mechanics and Energy Engineering, MAMEE 2013 - , 新加坡
持續時間: 2013 七月 272013 七月 29

出版系列

名字Applied Mechanics and Materials
394
ISSN(列印)1660-9336
ISSN(電子)1662-7482

其他

其他2013 International Conference on Mechatronics, Applied Mechanics and Energy Engineering, MAMEE 2013
國家新加坡
期間13/7/2713/7/29

ASJC Scopus subject areas

  • Engineering(all)

指紋 深入研究「Optical characteristics of WO<sub>3</sub> thin films prepared using the electrodeposition method」主題。共同形成了獨特的指紋。

  • 引用此

    Teng, T-P., Lin, L., & Yu, C. C. (2013). Optical characteristics of WO3 thin films prepared using the electrodeposition method. 於 Mechatronics, Applied Mechanics and Energy Engineering (頁 26-31). (Applied Mechanics and Materials; 卷 394). https://doi.org/10.4028/www.scientific.net/AMM.394.26