Nanotribological behavior of ZnO films prepared by atomic layer deposition

We used atomic layer deposition to form ZnO thin-film coatings on Si substrates and then evaluate the effect of pile-up using the nanoscratch technique under a ramped mode. The wear volume decreased with increasing annealing temperature from room temperature to 400 C for a given load. Elastic-to-plastic deformation occurred during sliding scratch processing between the groove and film for loading penetration of 30 nm. The onset of non-elastic behavior and greater contact pressure were evident for loading penetration of 150 nm; thus, full plastic deformation occurred as a result of a substrate effect. We suspect that elastic-plastic failure events were related to edge bulging between the groove and film, with elastic-plastic deformation attributable to adhesion discontinuities and/or cohesion failure of the ZnO films.