Investigation of the microstructures and mechanical properties of the Mg-(2, 5, 8) wt.%sn alloys at high temperatures after an ECAE process

Hao Jan Tsai, Chin-Guo Kuo*, Chuen Guang Chao, Tzeng Feng Liu

*此作品的通信作者

研究成果: 雜誌貢獻期刊論文同行評審

4 引文 斯高帕斯(Scopus)

摘要

This study focused on the effect of tin content on the microstructures and mechanical properties at high temperatures after Equal Channel Angular Extrusion (ECAE). The results showed that the Mg 2Sn phase increased gradually with the addition of tin. The grain boundary of the Mg-Sn alloys was seen to contain continuous eutectic α-Mg+Mg 2Sn precipitates in the Mg-5(wt.%)Sn and Mg-8(wt.%)Sn as-cast alloys. Besides the grain boundary particles, ultra fine Mg 2Sn particles were exhibited within the matrix of the alloy. After ECAE process, the effect of grain refining was very obvious and the continuous eutectic α-Mg+Mg 2Sn were broken by ECAE. Optimum mechanical properties were attained by adding 5(wt.%)Sn. The UTS increased from 67 MPa to 179 MPa at 200 °C and from 103 MPa to 248 MPa at 100 °C as well as the elongation increased from 10.6% to 18.9% at 200 °C and from 9.7% to 14.5% at 100 °C after four ECAE passes.

原文英語
頁(從 - 到)599-604
頁數6
期刊Advanced Science Letters
8
DOIs
出版狀態已發佈 - 2012 八月 2

ASJC Scopus subject areas

  • 電腦科學(全部)
  • 健康(社會科學)
  • 數學(全部)
  • 教育
  • 環境科學 (全部)
  • 工程 (全部)
  • 能源(全部)

指紋

深入研究「Investigation of the microstructures and mechanical properties of the Mg-(2, 5, 8) wt.%sn alloys at high temperatures after an ECAE process」主題。共同形成了獨特的指紋。

引用此