Increasing the extraction efficiency of AlGaInP LEDs via n-side surface roughening

Y. J. Lee, H. C. Kuo, S. C. Wang, T. C. Hsu, M. H. Hsieh, M. J. Jou, B. J. Lee

    研究成果: 雜誌貢獻期刊論文同行評審

    58 引文 斯高帕斯(Scopus)


    An n-side-up AlGaInP-based light-emitting diode (LED) with a triangle-like surface morphology was fabricated using the adhesive layer bonding technique, followed by wet etching to roughen the surface. The light output power of the roughened-surface LED was 1.6 times higher than that of a flat-surface LED at an injection current of 20 mA, i.e., a significant improvement attributed to the ability of the roughened surface to not only reduce the internal reflection between the rear mirror system and the semiconductor-air interface, but also to effectively scatter the light outside the LED device.

    頁(從 - 到)2289-2291
    期刊IEEE Photonics Technology Letters
    出版狀態已發佈 - 2005 十一月 1

    ASJC Scopus subject areas

    • Electronic, Optical and Magnetic Materials
    • Atomic and Molecular Physics, and Optics
    • Electrical and Electronic Engineering

    指紋 深入研究「Increasing the extraction efficiency of AlGaInP LEDs via n-side surface roughening」主題。共同形成了獨特的指紋。