Implementation of a 6-DOF precision positioning platform for a injection molded part

Sung Yu Hsieh*, Chang Han Jou, Mei Yung Chen, Sheng Chih Huang, Chih Hsien Lin, Li Chen Fu

*此作品的通信作者

研究成果: 書貢獻/報告類型會議論文篇章

1 引文 斯高帕斯(Scopus)

摘要

This paper propose a six degree-of-freedom (DOF) compact positioner with high resolution and large travel range for the manufacture of injection molded part application. The precise positioner is composed of monolithic parallel flexure mechanism, horizontal and vertical electromagnetic actuators, and optical displacement sensors to achieve the 6-DOF motion. The concept of the system intends to achieve three goals: 1) large travel range, 2) high precision positioning, and 3) fast response. In our system, there are eight sets of permanent magnets attached to the moving platform, and eight sets of electromagnets mounted on the bottom platen. The whole control architecture is to take the six posture data measured by the six optical displacement sensors first and then to control the 6-DOF motion by regulating the current in the electromagnetic actuators. For the purpose of system robustness and stability, an adaptive sliding-mode controller is proposed to validate the system performance. The developed robust adaptive control architecture consists of two components: 1) sliding mode controller, 2) adaptive law. From the simulation and experimental results, satisfactory performances of the hereby developed system, including stiffness and precision, have been successfully demonstrated.

原文英語
主出版物標題Proceedings of the 33rd Annual Conference of the IEEE Industrial Electronics Society, IECON
頁面2922-2927
頁數6
DOIs
出版狀態已發佈 - 2007
事件33rd Annual Conference of the IEEE Industrial Electronics Society, IECON - Taipei, 臺灣
持續時間: 2007 11月 52007 11月 8

出版系列

名字IECON Proceedings (Industrial Electronics Conference)

其他

其他33rd Annual Conference of the IEEE Industrial Electronics Society, IECON
國家/地區臺灣
城市Taipei
期間2007/11/052007/11/08

ASJC Scopus subject areas

  • 控制與系統工程
  • 電氣與電子工程

指紋

深入研究「Implementation of a 6-DOF precision positioning platform for a injection molded part」主題。共同形成了獨特的指紋。

引用此