Finite element model of the forefoot interface with accommodative footwear orthoses

David R. Lemmon, Tzyy-Yuang Shiang, Jan S. Ulbrecht, Azfar Hashmi, Terrence E. George, Peter R. Cavanagh

研究成果: 會議貢獻類型

摘要

Ulcers in the plantar soft tissue has been identified as a major problem in patients with neuropathy of the foot, particularly those suffering from diabetes mellitus. Elevated plantar pressure has been identified as a primary risk factor in ulceration. Current practice is to apply a footwear intervention at the foot-shoe interface to reduce plantar pressure levels. At present, there is little biomechanical data in the literature to aid in understanding how such orthoses can effectively be applied. The present study proposes finite element models which can be used in conjunction with clinical measurements to gain insight into the effectiveness of a given orthosis. The models are two-dimensional sagittal plane sections of the forefoot through the axis of the second metatarsal. The models contain between 1053 and 2025 nodes, and between 880 and 1840 bilinear continuum elements. Linear material properties are assigned to the bone, and hyperelastic material behavior is specified for the soft tissue and footwear orthoses. Sliding interface elements are employed at the foot-footwear interface. Vertical loads are applied to the metatarsal bone. Normal stress at the foot-footwear interface is compared with clinical plantar pressure measurements for similar tissue configurations (normal tissue and reduced, diabetic neuropathic tissue). A study is performed using insoles of varying thicknesses of elastomeric foam. The resulting peak plantar pressure values compare well with clinically measured values.

原文英語
頁面141-142
頁數2
出版狀態已發佈 - 1995 十二月 1
事件Proceedings of the 1995 ASME International Mechanical Congress and Exposition - San Francisco, CA, USA
持續時間: 1995 十一月 121995 十一月 17

其他

其他Proceedings of the 1995 ASME International Mechanical Congress and Exposition
城市San Francisco, CA, USA
期間95/11/1295/11/17

指紋

Tissue
Bone
Medical problems
Pressure measurement
Foams
Loads (forces)
Materials properties

ASJC Scopus subject areas

  • Engineering(all)

引用此文

Lemmon, D. R., Shiang, T-Y., Ulbrecht, J. S., Hashmi, A., George, T. E., & Cavanagh, P. R. (1995). Finite element model of the forefoot interface with accommodative footwear orthoses. 141-142. 論文發表於 Proceedings of the 1995 ASME International Mechanical Congress and Exposition, San Francisco, CA, USA, .

Finite element model of the forefoot interface with accommodative footwear orthoses. / Lemmon, David R.; Shiang, Tzyy-Yuang; Ulbrecht, Jan S.; Hashmi, Azfar; George, Terrence E.; Cavanagh, Peter R.

1995. 141-142 論文發表於 Proceedings of the 1995 ASME International Mechanical Congress and Exposition, San Francisco, CA, USA, .

研究成果: 會議貢獻類型

Lemmon, DR, Shiang, T-Y, Ulbrecht, JS, Hashmi, A, George, TE & Cavanagh, PR 1995, 'Finite element model of the forefoot interface with accommodative footwear orthoses', 論文發表於 Proceedings of the 1995 ASME International Mechanical Congress and Exposition, San Francisco, CA, USA, 95/11/12 - 95/11/17 頁 141-142.
Lemmon DR, Shiang T-Y, Ulbrecht JS, Hashmi A, George TE, Cavanagh PR. Finite element model of the forefoot interface with accommodative footwear orthoses. 1995. 論文發表於 Proceedings of the 1995 ASME International Mechanical Congress and Exposition, San Francisco, CA, USA, .
Lemmon, David R. ; Shiang, Tzyy-Yuang ; Ulbrecht, Jan S. ; Hashmi, Azfar ; George, Terrence E. ; Cavanagh, Peter R. / Finite element model of the forefoot interface with accommodative footwear orthoses. 論文發表於 Proceedings of the 1995 ASME International Mechanical Congress and Exposition, San Francisco, CA, USA, .2 p.
@conference{a7d9b71bb839453a9d224207c069c9c3,
title = "Finite element model of the forefoot interface with accommodative footwear orthoses",
abstract = "Ulcers in the plantar soft tissue has been identified as a major problem in patients with neuropathy of the foot, particularly those suffering from diabetes mellitus. Elevated plantar pressure has been identified as a primary risk factor in ulceration. Current practice is to apply a footwear intervention at the foot-shoe interface to reduce plantar pressure levels. At present, there is little biomechanical data in the literature to aid in understanding how such orthoses can effectively be applied. The present study proposes finite element models which can be used in conjunction with clinical measurements to gain insight into the effectiveness of a given orthosis. The models are two-dimensional sagittal plane sections of the forefoot through the axis of the second metatarsal. The models contain between 1053 and 2025 nodes, and between 880 and 1840 bilinear continuum elements. Linear material properties are assigned to the bone, and hyperelastic material behavior is specified for the soft tissue and footwear orthoses. Sliding interface elements are employed at the foot-footwear interface. Vertical loads are applied to the metatarsal bone. Normal stress at the foot-footwear interface is compared with clinical plantar pressure measurements for similar tissue configurations (normal tissue and reduced, diabetic neuropathic tissue). A study is performed using insoles of varying thicknesses of elastomeric foam. The resulting peak plantar pressure values compare well with clinically measured values.",
author = "Lemmon, {David R.} and Tzyy-Yuang Shiang and Ulbrecht, {Jan S.} and Azfar Hashmi and George, {Terrence E.} and Cavanagh, {Peter R.}",
year = "1995",
month = "12",
day = "1",
language = "English",
pages = "141--142",
note = "Proceedings of the 1995 ASME International Mechanical Congress and Exposition ; Conference date: 12-11-1995 Through 17-11-1995",

}

TY - CONF

T1 - Finite element model of the forefoot interface with accommodative footwear orthoses

AU - Lemmon, David R.

AU - Shiang, Tzyy-Yuang

AU - Ulbrecht, Jan S.

AU - Hashmi, Azfar

AU - George, Terrence E.

AU - Cavanagh, Peter R.

PY - 1995/12/1

Y1 - 1995/12/1

N2 - Ulcers in the plantar soft tissue has been identified as a major problem in patients with neuropathy of the foot, particularly those suffering from diabetes mellitus. Elevated plantar pressure has been identified as a primary risk factor in ulceration. Current practice is to apply a footwear intervention at the foot-shoe interface to reduce plantar pressure levels. At present, there is little biomechanical data in the literature to aid in understanding how such orthoses can effectively be applied. The present study proposes finite element models which can be used in conjunction with clinical measurements to gain insight into the effectiveness of a given orthosis. The models are two-dimensional sagittal plane sections of the forefoot through the axis of the second metatarsal. The models contain between 1053 and 2025 nodes, and between 880 and 1840 bilinear continuum elements. Linear material properties are assigned to the bone, and hyperelastic material behavior is specified for the soft tissue and footwear orthoses. Sliding interface elements are employed at the foot-footwear interface. Vertical loads are applied to the metatarsal bone. Normal stress at the foot-footwear interface is compared with clinical plantar pressure measurements for similar tissue configurations (normal tissue and reduced, diabetic neuropathic tissue). A study is performed using insoles of varying thicknesses of elastomeric foam. The resulting peak plantar pressure values compare well with clinically measured values.

AB - Ulcers in the plantar soft tissue has been identified as a major problem in patients with neuropathy of the foot, particularly those suffering from diabetes mellitus. Elevated plantar pressure has been identified as a primary risk factor in ulceration. Current practice is to apply a footwear intervention at the foot-shoe interface to reduce plantar pressure levels. At present, there is little biomechanical data in the literature to aid in understanding how such orthoses can effectively be applied. The present study proposes finite element models which can be used in conjunction with clinical measurements to gain insight into the effectiveness of a given orthosis. The models are two-dimensional sagittal plane sections of the forefoot through the axis of the second metatarsal. The models contain between 1053 and 2025 nodes, and between 880 and 1840 bilinear continuum elements. Linear material properties are assigned to the bone, and hyperelastic material behavior is specified for the soft tissue and footwear orthoses. Sliding interface elements are employed at the foot-footwear interface. Vertical loads are applied to the metatarsal bone. Normal stress at the foot-footwear interface is compared with clinical plantar pressure measurements for similar tissue configurations (normal tissue and reduced, diabetic neuropathic tissue). A study is performed using insoles of varying thicknesses of elastomeric foam. The resulting peak plantar pressure values compare well with clinically measured values.

UR - http://www.scopus.com/inward/record.url?scp=0029426489&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029426489&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:0029426489

SP - 141

EP - 142

ER -