Fabrication of a zinc aluminum oxide nanowire array photoelectrode for a solar cell using a high vacuum die casting technique

Chin-Guo Kuo, Jung Hsuan Chen, Yueh Han Liu

研究成果: 雜誌貢獻期刊論文同行評審

2 引文 斯高帕斯(Scopus)

摘要

Zinc aluminum alloy nanowire was fabricated by the vacuum die casting. Zinc aluminum alloy was melted, injected into nanomold under a hydraulic pressure, and solidified as nanowire shape. Nanomold was prepared by etching aluminum sheet with a purity of 99.7 wt.% in oxalic acid solution. A nanochannel within nanomold had a pore diameter of 80 nm and a thickness of 40 m. Microstructure and characteristic analysis of the alumina nanomold and zinc-aluminum nanowire were performed by scanning electron microscope, X-ray diffraction analysis, and energy dispersive X-ray spectroscopy. Zinc aluminum oxide nanowire array was produced using the thermal oxidation method and designed for the photoelectrode application.

原文英語
文章編號302075
期刊International Journal of Photoenergy
2014
DOIs
出版狀態已發佈 - 2014

ASJC Scopus subject areas

  • 化學 (全部)
  • 原子與分子物理與光學
  • 可再生能源、永續發展與環境
  • 材料科學(全部)

指紋

深入研究「Fabrication of a zinc aluminum oxide nanowire array photoelectrode for a solar cell using a high vacuum die casting technique」主題。共同形成了獨特的指紋。

引用此