Tien-Li Chang

2025

Analysis and optimization of injection molding process on warpage based on Taguchi design and PSO algorithm

Zhang, L., Chang, T. L., Tsao, C. C., Hsieh, K. C. & Hsu, C. Y., 2025 3月, 於: International Journal of Advanced Manufacturing Technology. 137, 1, p. 981-988 8 p., 143835.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Influence of aspect ratios on water disinfection efficiency in a serpentine flow channel using ultraviolet C light-emitting diode

Wang, C. P., Lin, Y. H., Jia, Q. & Chang, T. L., 2025, (接受/付印) 於: Environmental Technology (United Kingdom).

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Investigation and predictive multi-modeling of PVA/PVP-blended nanofiber diameter in electrospinning

Chen, Y. J., Chang, T. L., Wu, Q. X., Ke, K. C., Chiu, P. S. & Chen, C. T., 2025 1月, 於: International Journal of Advanced Manufacturing Technology. 136, 5, p. 2445-2453 9 p., 103425.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Investigations of thermoelectric properties in polymer-based hybrid nanofluids with various surfactants

Wang, R. T., Yang, C. A., Chen, S. L., Chang, T. L. & Wang, J. C., 2025 4月, 於: Journal of Physics and Chemistry of Solids. 199, 112557.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2024

Effect of focal spot size on AlSi10Mg alloy parts fabricated by laser powder bed fusion: Process window, mechanical properties, and microstructure

Hung, C. H., Chu, C. W., Chang, T. L., Lin, T. C. & Chen, Y. P., 2024 3月 15, 於: Journal of Alloys and Compounds. 977, 173338.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

5 引文斯高帕斯（Scopus）

Investigation of ultrafast laser surface patterning and nanocrystalline formation on CrTiN alloy films for enhanced cell proliferation

Wu, Q. X., Chang, T. L., Chen, Z. C., Hsiao, W. T. & Huang, S. P., 2024 3月, 於: Applied Physics A: Materials Science and Processing. 130, 3, 161.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Saturated Boiling Enhancement of Novec-7100 on Microgrooved Surfaces with Groove-Induced Anisotropic Properties

Lin, H. C., Kang, C. H., Cheng, H. C., Chang, T. L. & Chen, P. H., 2024 1月, 於: Applied Sciences (Switzerland). 14, 2, 495.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

2023

Effects of temperature and UV irradiation on picosecond laser fabricated flexible graphene microsensor for NO detection

Wang, C. P., Lee, G. H. & Chang, T. L., 2023 5月, 於: Applied Physics A: Materials Science and Processing. 129, 5, 355.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Surface modification of bio-orderly CrTiN thin films with periodic corrugated nanopod structures by picosecond laser ablation

Chen, Z. C., Chang, T. L., Wu, Q. X., Liu, C. C., Chen, H. C. & Huang, C. H., 2023 3月 25, 於: Journal of Alloys and Compounds. 938, 168193.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

5 引文斯高帕斯（Scopus）

2022

Investigation into anti-dust wetting surface with coral-like nanostructures reinforced by electrospun composite nanofibers

Chen, Z. C., Chang, T. L., Lee, H. S., Fan, J. Y. & Wang, C. P., 2022 2月, 於: International Journal of Advanced Manufacturing Technology. 118, 7-8, p. 2601-2612 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Optical characteristics on practical verification for pico-laser-engraved glass light guide plate with concave microstructures

Teng, T. C., Chang, T. L. & Tsai, H. C., 2022 2月, 於: International Journal of Advanced Manufacturing Technology. 118, 9-10, p. 3375-3387 13 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Ring droplet formation during evaporation of a sessile water droplet on a biphilic surface

Cheng, H. C., Li, C. H., Chang, T. L. & Chen, P. H., 2022 1月, 於: International Journal of Heat and Mass Transfer. 182, 121956.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

UV illumination control and enhancement of heat transfer during pool boiling process

Yang, S. Y., Hsu, C. C. & Chang, T. L., 2022 12月, 於: International Communications in Heat and Mass Transfer. 139, 106487.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

2021

Application of self-heating graphene reinforced polyvinyl alcohol nanowires to high-sensitivity humidity detection

Chen, Z. C., Chang, T. L., Su, K. W., Lee, H. S. & Wang, J. C., 2021 1月 15, 於: Sensors and Actuators, B: Chemical. 327, 128934.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

25 引文斯高帕斯（Scopus）

Effects of difference in wettability level of biphilic patterns on copper tubes in pool boiling heat transfer

Cheng, H. C., Jiang, Z. X., Chang, T. L. & Chen, P. H., 2021 1月 1, 於: Experimental Thermal and Fluid Science. 120, 110241.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

36 引文斯高帕斯（Scopus）

Evaporation heat transfer enhancement by a laser-textured heterogeneous surface

Hsu, C. C., Cheng, H. C., Chang, T. L. & Chen, P. H., 2021 11月 5, 於: Colloids and Surfaces A: Physicochemical and Engineering Aspects. 628, 127359.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

Fabrication of a bio-inspired hydrophobic thin film by glutaraldehyde crosslinking electrospun composite self-cleaning nanofibers

Chen, Z. C., Chang, T. L., Liou, D. S., Fan, J. Y. & Wang, C. P., 2021 9月 1, 於: Materials Letters. 298, 129975.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

Flexible NO gas sensor fabricated using graphene/silver nanoparticles stacked electrode structures

Chen, Z. C., Chang, T. L., Chen, C. H., Liou, D. S., Han, T. Y. & Wu, Q. X., 2021 7月 15, 於: Materials Letters. 295, 129826.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

Ultrafast laser direct writing of screen-printed graphene-based strain electrodes for sensing glass deformation

Tseng, S. F., Liao, C. H., Hsiao, W. T. & Chang, T. L., 2021 10月 15, 於: Ceramics International. 47, 20, p. 29099-29108 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

16 引文斯高帕斯（Scopus）

2020

Controlled bridge growth of ZnO nanowires on laser-scribed graphene-based devices for NO gas detection

Chou, C. Y., Tseng, S. F., Chang, T. L., Tu, C. T. & Han, H. C., 2020 4月 1, 於: Applied Surface Science. 508, 145204.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

34 引文斯高帕斯（Scopus）

Effect of biomimetic fishbone-patterned copper tubes on pool boiling heat transfer

Cheng, H. C., Chen, Y. Y., Chang, T. L. & Chen, P. H., 2020 12月, 於: International Journal of Heat and Mass Transfer. 162, 120371.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

19 引文斯高帕斯（Scopus）

Experimental investigation of inner bubble dynamics during water droplet evaporation from heated surfaces with different roughness and wettability levels

Cheng, H. C., Chang, T. L. & Chen, P. H., 2020 8月, 於: International Journal of Heat and Mass Transfer. 157, 119980.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

13 引文斯高帕斯（Scopus）

Picosecond laser surface modification of aluminum oxide with fish-scale structures for cell culture

Chen, Z. C., Chang, T. L., Liu, C. C., Hsiao, W. T. & Huang, C. H., 2020 8月 1, 於: Ceramics International. 46, 11, p. 17651-17658 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

13 引文斯高帕斯（Scopus）

Roughness and wettability properties of plain and silica-coated copper surfaces textured with picosecond laser

Cheng, H. C., Jiang, Z. X., Chang, T. L. & Chen, P. H., 2020 6月 1, 於: Applied Surface Science. 514, 145918.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

26 引文斯高帕斯（Scopus）

Study on the fabricated feasibility of electrodes in EDM using rapid prototyping (RP) and investment casting technology

Wu, Q. X., Wu, M. C., Hu, C. C., Hsu, C. Y., Chang, T. L. & Tsao, C. C., 2020 7月 1, 於: International Journal of Advanced Manufacturing Technology. 109, 1-2, p. 377-384 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

The investigation of electrothermal response and reliability of flexible graphene micro-heaters

Wang, C. P., Hsiao, M. H., Lee, G. H., Chang, T. L. & Lee, Y. W., 2020 5月 1, 於: Microelectronic Engineering. 228, 111334.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

11 引文斯高帕斯（Scopus）

2019

Flexible graphene-based micro-capacitors using ultrafast laser ablation

Wang, C. P., Chou, C. P., Wang, P. C. & Chang, T. L., 2019 7月 15, 於: Microelectronic Engineering. 215, 111000.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Picosecond laser-direct fabrication of graphene-based electrodes for a gas sensor module with wireless circuits

Chang, T. L., Chou, C. Y., Wang, C. P., Teng, T. C. & Han, H. C., 2019 4月 1, 於: Microelectronic Engineering. 210, p. 19-26 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

10 引文斯高帕斯（Scopus）

Thermally stable and uniform DNA amplification with picosecond laser ablated graphene rapid thermal cycling device

Chen, Z. C., Chang, T. L., Li, C. H., Su, K. W. & Liu, C. C., 2019 12月 15, 於: Biosensors and Bioelectronics. 146, 111581.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

Ultrafast laser structuring of graphene-based multi-zone heaters for the detection of antioxidant capacity

Chen, Z. C., Tseng, S. F., Chang, T. L., Hsiao, W. T. & Lin, Y. S., 2019 8月 19, 於: International Journal of Advanced Manufacturing Technology. 103, 5-8, p. 3115-3124 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Wettability of laser-textured copper surface after a water-bath process

Cheng, H. C., Chang, T. L., Lin, C. S. & Chen, P. H., 2019 12月 1, 於: AIP Advances. 9, 12, 125140.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

2018

A facile approach to fabrication and characterization of conductive conjugated polyvinyl alcohol/graphene composite nanofibers

Chen, Z. C., Chang, T. L., Pan, T. C., Chiang, D. & Tseng, S. F., 2018 12月 15, 於: Materials Letters. 233, p. 130-133 4 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

7 引文斯高帕斯（Scopus）

Micromachining of graphene based micro-capacitor using picosecond laser ablation

Wang, C. P., Chou, C. P., Chang, T. L. & Chou, C. Y., 2018 4月 5, 於: Microelectronic Engineering. 189, p. 69-73 5 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

14 引文斯高帕斯（Scopus）

高脈衝UV雷射直寫網印石墨烯薄膜於電極成型之探討

曾釋鋒(Shih-Feng Tseng), 蕭文澤(Wen-Tse Hsiao) & 張天立(Tien-Li Chang), 2018, 於: 科儀新知. 214, p. 67-81 15 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2017

Direct fabrication of nanofiber scaffolds in pillar-based microfluidic device by using electrospinning and picosecond laser pulses

Chang, T. L., Huang, C. H., Chou, S. Y., Tseng, S. F. & Lee, Y. W., 2017 6月 5, 於: Microelectronic Engineering. 177, p. 52-58 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

8 引文斯高帕斯（Scopus）

Laser structuring of parallel electrode array on graphene/glass substrates for rapid inspections of moisturizing efficacy

Tseng, S. F., Haiso, W. T., Cheng, P. Y., Lin, Y. S., Chang, T. L. & Chung, C. K., 2017 8月 1, 於: International Journal of Advanced Manufacturing Technology. 91, 9-12, p. 3663-3671 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

9 引文斯高帕斯（Scopus）

2016

Laser micromachining of screen-printed graphene for forming electrode structures

Chang, T. L., Chen, Z. C. & Tseng, S. F., 2016 6月 30, 於: Applied Surface Science. 374, p. 305-311 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

9 引文斯高帕斯（Scopus）

Manipulating mimicked magnetosome chains produced Using superparamagnetic microbeads in a confined space

Li, Y. H., Su, T. Y., Chang, T. L. & Lee, Y. W., 2016 3月 5, 於: Microelectronic Engineering. 153, p. 37-42 6 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Patterning of multilayer graphene on glass substrate by using ultraviolet picosecond laser pulses

Chang, T. L., Chen, Z. C., Chen, W. Y., Han, H. C. & Tseng, S. F., 2016 6月 1, 於: Microelectronic Engineering. 158, p. 1-5 5 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

15 引文斯高帕斯（Scopus）

The investigation of flip-chip eutectic bonding on the performance and lifetime of light emitting diodes

Ying, S. P., Wang, C. P., Su, Y. C. & Chang, T. L., 2016 7月 1, 於: Microelectronic Engineering. 160, p. 1-4 4 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

Ultrafast laser ablation of soda-lime glass for fabricating microfluidic pillar array channels

Chang, T. L., Chen, Z. C., Lee, Y. W., Li, Y. H. & Wang, C. P., 2016 6月 1, 於: Microelectronic Engineering. 158, p. 95-101 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

17 引文斯高帕斯（Scopus）

2015

Investigation the interaction between the pulsed ultraviolet laser beams and PEDOT:PSS/graphene composite films

Tseng, S. F., Hsiao, W. T., Chung, C. K. & Chang, T. L., 2015 11月 30, 於: Applied Surface Science. 356, p. 486-491 6 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

10 引文斯高帕斯（Scopus）

Micromachining NiTi tubes for use in medical devices by using a femtosecond laser

Hung, C. H., Chang, F. Y., Chang, T. L., Chang, Y. T., Huang, K. W. & Liang, P. C., 2015 3月, 於: Optics and Lasers in Engineering. 66, p. 34-40 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

49 引文斯高帕斯（Scopus）

Multilayered structuring of thin-film PV modules by ultrafast laser ablation

Chen, C. Y. & Chang, T. L., 2015 8月 1, 於: Microelectronic Engineering. 143, p. 41-47 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

20 引文斯高帕斯（Scopus）

Surface forming on glass material by femtosecond laser modification with HF etching process

Tsai, H. Y., Luo, S. W. & Chang, T. L., 2015, 於: CIRP Annals - Manufacturing Technology. 64, 1, p. 205-208 4 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

12 引文斯高帕斯（Scopus）

Surface patterning of multilayer graphene by ultraviolet laser irradiation in biomolecule sensing devices

Chang, T. L. & Chen, Z. C., 2015 12月 30, 於: Applied Surface Science. 359, p. 543-549 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

7 引文斯高帕斯（Scopus）

Thermal Analysis of Eutectic Flip-Chip Light-Emitting Diodes Fabricated Using Copper-Coated Ceramic Substrate

Wang, C. P., Ying, S. P., Su, Y. C. & Chang, T. L., 2015 8月 1, 於: IEEE Transactions on Electron Devices. 62, 8, p. 2524-2527 4 p., 7132733.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

15 引文斯高帕斯（Scopus）

2013

Metal deposition on flexible membrane through the combination of localized electrochemical deposition and electroless plating

Huang, M. C., Chang, T. L., Kao, T. H. & Fu, C. C., 2013 3月, 於: Microsystem Technologies. 19, 3, p. 455-460 6 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Micromachining of microfluidic channels in glass by microjoule femtosecond laser pulses

Chang, T. L., 2013, 於: Microelectronic Engineering. 110, p. 450-456 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

12 引文斯高帕斯（Scopus）

Novel perturbations between magnetic nanofluid and the thermal fluidic system at heat dissipation

Lee, Y. W. & Chang, T. L., 2013, 於: Microelectronic Engineering. 111, p. 58-63 6 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

15 引文斯高帕斯（Scopus）

張 天立

研究成果

搜尋結果

張天立