Sputter-cleaning of an aluminum alloy using a thermionically assisted triode plasma system

J. H. Hsieh, C. Li, Shiu-Jen Liu

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Polished aluminum alloy (6061) samples were cleaned using Ar plasma in a diode or triode plasma system. By monitoring cathode current, the changes of surface state and removal (cleaning) rate were determined and compared based on various setup. A modified mathematical model, based on Berg's reactive sputtering model, is derived and proposed to simulate the cleaning process. The results show that it is possible to sputter-clean the substrate under a triode setup with low bias and high ion bombardment rate (i.e. -500 V, triode, 1.3 Pa). This triode cleaning process was comparable with high bias and high working pressure diode process (i.e. -2500 V, diode, 3.3 Pa). Cleaning with high energy particle bombardment can create rough surface in nano-scale, although with the similar efficiency. Also, according to the regressive fitting on the cathode current-time curve, it is found that the average secondary electron yield for the oxide compound is around 0.33 if the average secondary electron yield for aluminum metal is 0.1.

Original languageEnglish
Pages (from-to)869-873
Number of pages5
JournalMaterials Chemistry and Physics
Volume141
Issue number2-3
DOIs
Publication statusPublished - 2013 Sep 16

Keywords

  • Glow discharge
  • Oxides
  • Sputtering
  • Surfaces

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics

Fingerprint Dive into the research topics of 'Sputter-cleaning of an aluminum alloy using a thermionically assisted triode plasma system'. Together they form a unique fingerprint.

Cite this