Rapid-prototyping designs for the three-power-source hybrid electric scooter with a fuzzy-control energy management

Chien Hsun Wu, Yi Hsuan Hung, Syuan Yi Chen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This study mainly develops a hardware-in-the-loop (HIL) platform for a hybrid electric scooter (HES). The fuzzy control strategy is utilized for the energy management among three power sources. A low-order scooter dynamics is constructed including subsystems such as the spark-ignition engine, high-power traction motor, integrated starter-generator (ISG), high-power battery module, transmission, longitudinal vehicle dynamics, etc. For energy management of three power sources, the 73-rule fuzzy control is designed and compared to the traditional rule-based control. Three inputs are the battery state-of-charge (SOC), required torque and engine speed. Three outputs are torque commands for the engine, the motor, and the ISG. The system model and the energy management system are integrated for off-line simulation then. The verified models of control strategy and the vehicle dynamics are downloaded to two real-time simulators for the close-loop control with A/D D/A interface. Simulation results show that the vehicle model details the dynamics of key components, while the energy consumptions of these two control modes are nearly 170kJ under ECE40 driving cycle. This HIL platform can be used for rapid prototyping for vehicle control unit (VCU) designs of HES. The general vehicle model can be extended to various power-level hybrid vehicles with three power sources.

Original languageEnglish
Title of host publication2016 International Conference on Applied System Innovation, IEEE ICASI 2016
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781467398886
DOIs
Publication statusPublished - 2016 Aug 10
Event2016 International Conference on Applied System Innovation, IEEE ICASI 2016 - Ginowan City Okinawa, Japan
Duration: 2016 May 282016 Jun 1

Other

Other2016 International Conference on Applied System Innovation, IEEE ICASI 2016
CountryJapan
CityGinowan City Okinawa
Period16/5/2816/6/1

Fingerprint

Energy Management
Rapid Prototyping
Energy management
Rapid prototyping
Fuzzy control
Fuzzy Control
energy
Hardware-in-the-loop
Engine
Vehicle Dynamics
management
Starters
Battery
High Power
Torque
Control Strategy
Generator
Engines
Ignition
Traction motors

Keywords

  • Fuzzy control
  • Hardware-in-the-loop
  • Hybrid Electric Scooter
  • Modeling

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Computer Science Applications
  • Control and Systems Engineering
  • Social Sciences (miscellaneous)
  • Business, Management and Accounting (miscellaneous)
  • Electrical and Electronic Engineering
  • Control and Optimization

Cite this

Wu, C. H., Hung, Y. H., & Chen, S. Y. (2016). Rapid-prototyping designs for the three-power-source hybrid electric scooter with a fuzzy-control energy management. In 2016 International Conference on Applied System Innovation, IEEE ICASI 2016 [7539930] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICASI.2016.7539930

Rapid-prototyping designs for the three-power-source hybrid electric scooter with a fuzzy-control energy management. / Wu, Chien Hsun; Hung, Yi Hsuan; Chen, Syuan Yi.

2016 International Conference on Applied System Innovation, IEEE ICASI 2016. Institute of Electrical and Electronics Engineers Inc., 2016. 7539930.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wu, CH, Hung, YH & Chen, SY 2016, Rapid-prototyping designs for the three-power-source hybrid electric scooter with a fuzzy-control energy management. in 2016 International Conference on Applied System Innovation, IEEE ICASI 2016., 7539930, Institute of Electrical and Electronics Engineers Inc., 2016 International Conference on Applied System Innovation, IEEE ICASI 2016, Ginowan City Okinawa, Japan, 16/5/28. https://doi.org/10.1109/ICASI.2016.7539930
Wu CH, Hung YH, Chen SY. Rapid-prototyping designs for the three-power-source hybrid electric scooter with a fuzzy-control energy management. In 2016 International Conference on Applied System Innovation, IEEE ICASI 2016. Institute of Electrical and Electronics Engineers Inc. 2016. 7539930 https://doi.org/10.1109/ICASI.2016.7539930
Wu, Chien Hsun ; Hung, Yi Hsuan ; Chen, Syuan Yi. / Rapid-prototyping designs for the three-power-source hybrid electric scooter with a fuzzy-control energy management. 2016 International Conference on Applied System Innovation, IEEE ICASI 2016. Institute of Electrical and Electronics Engineers Inc., 2016.
@inproceedings{c86e472fc4d84c19835e31d0be237fea,
title = "Rapid-prototyping designs for the three-power-source hybrid electric scooter with a fuzzy-control energy management",
abstract = "This study mainly develops a hardware-in-the-loop (HIL) platform for a hybrid electric scooter (HES). The fuzzy control strategy is utilized for the energy management among three power sources. A low-order scooter dynamics is constructed including subsystems such as the spark-ignition engine, high-power traction motor, integrated starter-generator (ISG), high-power battery module, transmission, longitudinal vehicle dynamics, etc. For energy management of three power sources, the 73-rule fuzzy control is designed and compared to the traditional rule-based control. Three inputs are the battery state-of-charge (SOC), required torque and engine speed. Three outputs are torque commands for the engine, the motor, and the ISG. The system model and the energy management system are integrated for off-line simulation then. The verified models of control strategy and the vehicle dynamics are downloaded to two real-time simulators for the close-loop control with A/D D/A interface. Simulation results show that the vehicle model details the dynamics of key components, while the energy consumptions of these two control modes are nearly 170kJ under ECE40 driving cycle. This HIL platform can be used for rapid prototyping for vehicle control unit (VCU) designs of HES. The general vehicle model can be extended to various power-level hybrid vehicles with three power sources.",
keywords = "Fuzzy control, Hardware-in-the-loop, Hybrid Electric Scooter, Modeling",
author = "Wu, {Chien Hsun} and Hung, {Yi Hsuan} and Chen, {Syuan Yi}",
year = "2016",
month = "8",
day = "10",
doi = "10.1109/ICASI.2016.7539930",
language = "English",
booktitle = "2016 International Conference on Applied System Innovation, IEEE ICASI 2016",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Rapid-prototyping designs for the three-power-source hybrid electric scooter with a fuzzy-control energy management

AU - Wu, Chien Hsun

AU - Hung, Yi Hsuan

AU - Chen, Syuan Yi

PY - 2016/8/10

Y1 - 2016/8/10

N2 - This study mainly develops a hardware-in-the-loop (HIL) platform for a hybrid electric scooter (HES). The fuzzy control strategy is utilized for the energy management among three power sources. A low-order scooter dynamics is constructed including subsystems such as the spark-ignition engine, high-power traction motor, integrated starter-generator (ISG), high-power battery module, transmission, longitudinal vehicle dynamics, etc. For energy management of three power sources, the 73-rule fuzzy control is designed and compared to the traditional rule-based control. Three inputs are the battery state-of-charge (SOC), required torque and engine speed. Three outputs are torque commands for the engine, the motor, and the ISG. The system model and the energy management system are integrated for off-line simulation then. The verified models of control strategy and the vehicle dynamics are downloaded to two real-time simulators for the close-loop control with A/D D/A interface. Simulation results show that the vehicle model details the dynamics of key components, while the energy consumptions of these two control modes are nearly 170kJ under ECE40 driving cycle. This HIL platform can be used for rapid prototyping for vehicle control unit (VCU) designs of HES. The general vehicle model can be extended to various power-level hybrid vehicles with three power sources.

AB - This study mainly develops a hardware-in-the-loop (HIL) platform for a hybrid electric scooter (HES). The fuzzy control strategy is utilized for the energy management among three power sources. A low-order scooter dynamics is constructed including subsystems such as the spark-ignition engine, high-power traction motor, integrated starter-generator (ISG), high-power battery module, transmission, longitudinal vehicle dynamics, etc. For energy management of three power sources, the 73-rule fuzzy control is designed and compared to the traditional rule-based control. Three inputs are the battery state-of-charge (SOC), required torque and engine speed. Three outputs are torque commands for the engine, the motor, and the ISG. The system model and the energy management system are integrated for off-line simulation then. The verified models of control strategy and the vehicle dynamics are downloaded to two real-time simulators for the close-loop control with A/D D/A interface. Simulation results show that the vehicle model details the dynamics of key components, while the energy consumptions of these two control modes are nearly 170kJ under ECE40 driving cycle. This HIL platform can be used for rapid prototyping for vehicle control unit (VCU) designs of HES. The general vehicle model can be extended to various power-level hybrid vehicles with three power sources.

KW - Fuzzy control

KW - Hardware-in-the-loop

KW - Hybrid Electric Scooter

KW - Modeling

UR - http://www.scopus.com/inward/record.url?scp=84988473965&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84988473965&partnerID=8YFLogxK

U2 - 10.1109/ICASI.2016.7539930

DO - 10.1109/ICASI.2016.7539930

M3 - Conference contribution

BT - 2016 International Conference on Applied System Innovation, IEEE ICASI 2016

PB - Institute of Electrical and Electronics Engineers Inc.

ER -