Performance of the KAGRA detector during the first joint observation with GEO 600 (O3GK)

KAGRA collaboration

Research output: Contribution to journalArticlepeer-review

7 Citations (Scopus)

Abstract

KAGRA, the kilometer-scale underground gravitational-wave detector, is located at Kamioka, Japan. In April 2020, an astrophysics observation was performed at the KAGRA detector in combination with the GEO 600 detector; this observation operation is called O3GK. The optical configuration in O3GK is based on a power-recycled Fabry-Pérot-Michelson interferometer; all the mirrors were set at room temperature. The duty factor of the operation was approximately 53%, and the displacement sensitivity was approximately 1 × 10-18 at 250 Hz. The binary-neutron-star (BNS) inspiral range was about 0.6 Mpc. The contributions of various noise sources to the sensitivity of O3GK were investigated to understand how the observation range could be improved; this study is called a "noise budget". According to our noise budget, the measured sensitivity could be approximated by adding up the effect of each noise. The sensitivity was dominated by noise from the sensors used for local controls of the vibration isolation systems, acoustic noise, shot noise, and laser frequency noise. Further, other noise sources that did not limit the sensitivity were investigated. This paper provides a detailed account of the KAGRA detector in O3GK, including interferometer configuration, status, and noise budget. In addition, strategies for future sensitivity improvements, such as hardware upgrades, are discussed.

Original languageEnglish
Article number10A101
JournalProgress of Theoretical and Experimental Physics
Volume2023
Issue number10
DOIs
Publication statusPublished - 2023 Oct 1

ASJC Scopus subject areas

  • General Physics and Astronomy

Fingerprint

Dive into the research topics of 'Performance of the KAGRA detector during the first joint observation with GEO 600 (O3GK)'. Together they form a unique fingerprint.

Cite this