Optical characteristics of WO3 thin films prepared using the electrodeposition method

Tun-Ping Teng, Li Lin, Chao Chieh Yu

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The tungsten oxide (WO3) thin films on the indium tin oxide (ITO) glass in this study were produced by applying the electrodeposition method (ED). This method involves adjusting ED time to control the structure, film thickness, and morphology of WO3 thin films. Furthermore, the crystallization of the WO3 thin films was controlled by annealing them at 200 °C and 500 °C. The results show that the WO3 coated glass with non-annealed and annealed at 200 °C has a high transmittance of visible light and anti-infrared characteristics. However, the WO3 coated glass annealed at 500 °C has high infrared transmittance, with the highest infrared transmittance reaching 85% at the 1000 nm wavelength. To improve the heat collecting efficiency of solar water heaters, the high infrared WO3 coated glass can be applied to the surface of the heat collecting component.

Original languageEnglish
Title of host publicationMechatronics, Applied Mechanics and Energy Engineering
Pages26-31
Number of pages6
DOIs
Publication statusPublished - 2013 Oct 25
Event2013 International Conference on Mechatronics, Applied Mechanics and Energy Engineering, MAMEE 2013 - , Singapore
Duration: 2013 Jul 272013 Jul 29

Publication series

NameApplied Mechanics and Materials
Volume394
ISSN (Print)1660-9336
ISSN (Electronic)1662-7482

Other

Other2013 International Conference on Mechatronics, Applied Mechanics and Energy Engineering, MAMEE 2013
CountrySingapore
Period13/7/2713/7/29

Fingerprint

Electrodeposition
Infrared radiation
Thin films
Glass
Solar water heaters
ITO glass
Oxide films
Tungsten
Film thickness
Crystallization
Annealing
Wavelength
Hot Temperature

Keywords

  • Annealing treatment
  • Anti-infrared characteristics
  • Electrodeposition method (ED)
  • Indium tin oxide (ITO)
  • Tungsten oxide (WO)

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Teng, T-P., Lin, L., & Yu, C. C. (2013). Optical characteristics of WO3 thin films prepared using the electrodeposition method. In Mechatronics, Applied Mechanics and Energy Engineering (pp. 26-31). (Applied Mechanics and Materials; Vol. 394). https://doi.org/10.4028/www.scientific.net/AMM.394.26

Optical characteristics of WO3 thin films prepared using the electrodeposition method. / Teng, Tun-Ping; Lin, Li; Yu, Chao Chieh.

Mechatronics, Applied Mechanics and Energy Engineering. 2013. p. 26-31 (Applied Mechanics and Materials; Vol. 394).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teng, T-P, Lin, L & Yu, CC 2013, Optical characteristics of WO3 thin films prepared using the electrodeposition method. in Mechatronics, Applied Mechanics and Energy Engineering. Applied Mechanics and Materials, vol. 394, pp. 26-31, 2013 International Conference on Mechatronics, Applied Mechanics and Energy Engineering, MAMEE 2013, Singapore, 13/7/27. https://doi.org/10.4028/www.scientific.net/AMM.394.26
Teng T-P, Lin L, Yu CC. Optical characteristics of WO3 thin films prepared using the electrodeposition method. In Mechatronics, Applied Mechanics and Energy Engineering. 2013. p. 26-31. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.394.26
Teng, Tun-Ping ; Lin, Li ; Yu, Chao Chieh. / Optical characteristics of WO3 thin films prepared using the electrodeposition method. Mechatronics, Applied Mechanics and Energy Engineering. 2013. pp. 26-31 (Applied Mechanics and Materials).
@inproceedings{937512f9d4a04e75b297630ec42245f9,
title = "Optical characteristics of WO3 thin films prepared using the electrodeposition method",
abstract = "The tungsten oxide (WO3) thin films on the indium tin oxide (ITO) glass in this study were produced by applying the electrodeposition method (ED). This method involves adjusting ED time to control the structure, film thickness, and morphology of WO3 thin films. Furthermore, the crystallization of the WO3 thin films was controlled by annealing them at 200 °C and 500 °C. The results show that the WO3 coated glass with non-annealed and annealed at 200 °C has a high transmittance of visible light and anti-infrared characteristics. However, the WO3 coated glass annealed at 500 °C has high infrared transmittance, with the highest infrared transmittance reaching 85{\%} at the 1000 nm wavelength. To improve the heat collecting efficiency of solar water heaters, the high infrared WO3 coated glass can be applied to the surface of the heat collecting component.",
keywords = "Annealing treatment, Anti-infrared characteristics, Electrodeposition method (ED), Indium tin oxide (ITO), Tungsten oxide (WO)",
author = "Tun-Ping Teng and Li Lin and Yu, {Chao Chieh}",
year = "2013",
month = "10",
day = "25",
doi = "10.4028/www.scientific.net/AMM.394.26",
language = "English",
isbn = "9783037858325",
series = "Applied Mechanics and Materials",
pages = "26--31",
booktitle = "Mechatronics, Applied Mechanics and Energy Engineering",

}

TY - GEN

T1 - Optical characteristics of WO3 thin films prepared using the electrodeposition method

AU - Teng, Tun-Ping

AU - Lin, Li

AU - Yu, Chao Chieh

PY - 2013/10/25

Y1 - 2013/10/25

N2 - The tungsten oxide (WO3) thin films on the indium tin oxide (ITO) glass in this study were produced by applying the electrodeposition method (ED). This method involves adjusting ED time to control the structure, film thickness, and morphology of WO3 thin films. Furthermore, the crystallization of the WO3 thin films was controlled by annealing them at 200 °C and 500 °C. The results show that the WO3 coated glass with non-annealed and annealed at 200 °C has a high transmittance of visible light and anti-infrared characteristics. However, the WO3 coated glass annealed at 500 °C has high infrared transmittance, with the highest infrared transmittance reaching 85% at the 1000 nm wavelength. To improve the heat collecting efficiency of solar water heaters, the high infrared WO3 coated glass can be applied to the surface of the heat collecting component.

AB - The tungsten oxide (WO3) thin films on the indium tin oxide (ITO) glass in this study were produced by applying the electrodeposition method (ED). This method involves adjusting ED time to control the structure, film thickness, and morphology of WO3 thin films. Furthermore, the crystallization of the WO3 thin films was controlled by annealing them at 200 °C and 500 °C. The results show that the WO3 coated glass with non-annealed and annealed at 200 °C has a high transmittance of visible light and anti-infrared characteristics. However, the WO3 coated glass annealed at 500 °C has high infrared transmittance, with the highest infrared transmittance reaching 85% at the 1000 nm wavelength. To improve the heat collecting efficiency of solar water heaters, the high infrared WO3 coated glass can be applied to the surface of the heat collecting component.

KW - Annealing treatment

KW - Anti-infrared characteristics

KW - Electrodeposition method (ED)

KW - Indium tin oxide (ITO)

KW - Tungsten oxide (WO)

UR - http://www.scopus.com/inward/record.url?scp=84886922620&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84886922620&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.394.26

DO - 10.4028/www.scientific.net/AMM.394.26

M3 - Conference contribution

AN - SCOPUS:84886922620

SN - 9783037858325

T3 - Applied Mechanics and Materials

SP - 26

EP - 31

BT - Mechatronics, Applied Mechanics and Energy Engineering

ER -