Non-overshooting PI control of variable-speed motor drives with sliding perturbation observers

Yu-Shen Lu, Chao Min Cheng, Chung Hsin Cheng

Research output: Contribution to journalArticle

28 Citations (Scopus)

Abstract

This paper describes the design of a non-overshooting proportional-integral (PI) controller with pre-assigned initial integral state and perturbation compensation for variable-speed motor drives. According to the requirement of non-overshooting output response and the specified settling time in tracking a step reference signal, the PI gains and the initial integral state are determined systematically. The proposed PI controller design provides continuous control signals even when the nominal system is subject to sudden set-point changes, implying smooth system performance. To compensate for the system perturbation resulting from parameter variations and unknown disturbances, a sliding perturbation observer is proposed and integrated into the PI-controlled system. The perturbation-estimation process, consisting of an integral action and a low-pass filtering, does not require a switching gain with its magnitude larger than the absolute value of system perturbation. Moreover, since the sliding mode exists in the observer during an entire response, the estimation process is fast and active from the very beginning of the system operation while the chattering problem in control is alleviated. The usefulness of the proposed design is demonstrated through experimental studies.

Original languageEnglish
Pages (from-to)1143-1158
Number of pages16
JournalMechatronics
Volume15
Issue number9
DOIs
Publication statusPublished - 2005 Nov 1

Fingerprint

Controllers
Compensation and Redress

Keywords

  • Non-overshooting servo systems
  • PI control
  • Perturbation observer
  • Sliding mode

ASJC Scopus subject areas

  • Mechanical Engineering
  • Computer Science Applications
  • Electrical and Electronic Engineering

Cite this

Non-overshooting PI control of variable-speed motor drives with sliding perturbation observers. / Lu, Yu-Shen; Cheng, Chao Min; Cheng, Chung Hsin.

In: Mechatronics, Vol. 15, No. 9, 01.11.2005, p. 1143-1158.

Research output: Contribution to journalArticle

Lu, Yu-Shen ; Cheng, Chao Min ; Cheng, Chung Hsin. / Non-overshooting PI control of variable-speed motor drives with sliding perturbation observers. In: Mechatronics. 2005 ; Vol. 15, No. 9. pp. 1143-1158.
@article{6ca2cf026e0242fe81e6de1160923dda,
title = "Non-overshooting PI control of variable-speed motor drives with sliding perturbation observers",
abstract = "This paper describes the design of a non-overshooting proportional-integral (PI) controller with pre-assigned initial integral state and perturbation compensation for variable-speed motor drives. According to the requirement of non-overshooting output response and the specified settling time in tracking a step reference signal, the PI gains and the initial integral state are determined systematically. The proposed PI controller design provides continuous control signals even when the nominal system is subject to sudden set-point changes, implying smooth system performance. To compensate for the system perturbation resulting from parameter variations and unknown disturbances, a sliding perturbation observer is proposed and integrated into the PI-controlled system. The perturbation-estimation process, consisting of an integral action and a low-pass filtering, does not require a switching gain with its magnitude larger than the absolute value of system perturbation. Moreover, since the sliding mode exists in the observer during an entire response, the estimation process is fast and active from the very beginning of the system operation while the chattering problem in control is alleviated. The usefulness of the proposed design is demonstrated through experimental studies.",
keywords = "Non-overshooting servo systems, PI control, Perturbation observer, Sliding mode",
author = "Yu-Shen Lu and Cheng, {Chao Min} and Cheng, {Chung Hsin}",
year = "2005",
month = "11",
day = "1",
doi = "10.1016/j.mechatronics.2005.03.006",
language = "English",
volume = "15",
pages = "1143--1158",
journal = "Mechatronics",
issn = "0957-4158",
publisher = "Elsevier Limited",
number = "9",

}

TY - JOUR

T1 - Non-overshooting PI control of variable-speed motor drives with sliding perturbation observers

AU - Lu, Yu-Shen

AU - Cheng, Chao Min

AU - Cheng, Chung Hsin

PY - 2005/11/1

Y1 - 2005/11/1

N2 - This paper describes the design of a non-overshooting proportional-integral (PI) controller with pre-assigned initial integral state and perturbation compensation for variable-speed motor drives. According to the requirement of non-overshooting output response and the specified settling time in tracking a step reference signal, the PI gains and the initial integral state are determined systematically. The proposed PI controller design provides continuous control signals even when the nominal system is subject to sudden set-point changes, implying smooth system performance. To compensate for the system perturbation resulting from parameter variations and unknown disturbances, a sliding perturbation observer is proposed and integrated into the PI-controlled system. The perturbation-estimation process, consisting of an integral action and a low-pass filtering, does not require a switching gain with its magnitude larger than the absolute value of system perturbation. Moreover, since the sliding mode exists in the observer during an entire response, the estimation process is fast and active from the very beginning of the system operation while the chattering problem in control is alleviated. The usefulness of the proposed design is demonstrated through experimental studies.

AB - This paper describes the design of a non-overshooting proportional-integral (PI) controller with pre-assigned initial integral state and perturbation compensation for variable-speed motor drives. According to the requirement of non-overshooting output response and the specified settling time in tracking a step reference signal, the PI gains and the initial integral state are determined systematically. The proposed PI controller design provides continuous control signals even when the nominal system is subject to sudden set-point changes, implying smooth system performance. To compensate for the system perturbation resulting from parameter variations and unknown disturbances, a sliding perturbation observer is proposed and integrated into the PI-controlled system. The perturbation-estimation process, consisting of an integral action and a low-pass filtering, does not require a switching gain with its magnitude larger than the absolute value of system perturbation. Moreover, since the sliding mode exists in the observer during an entire response, the estimation process is fast and active from the very beginning of the system operation while the chattering problem in control is alleviated. The usefulness of the proposed design is demonstrated through experimental studies.

KW - Non-overshooting servo systems

KW - PI control

KW - Perturbation observer

KW - Sliding mode

UR - http://www.scopus.com/inward/record.url?scp=23944527307&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=23944527307&partnerID=8YFLogxK

U2 - 10.1016/j.mechatronics.2005.03.006

DO - 10.1016/j.mechatronics.2005.03.006

M3 - Article

AN - SCOPUS:23944527307

VL - 15

SP - 1143

EP - 1158

JO - Mechatronics

JF - Mechatronics

SN - 0957-4158

IS - 9

ER -