Micro screw pin assembly and on-the-machine assembly technologies

Chang Sheng Lin, Yunn Shiuan Liao, Shun Tong Chen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Micro assembly is necessary for a miniature product. In this paper a novel assembly technology is proposed. First, a pin of screw type is produced by WEDG, and it is fixed on the plate by the developed screw tight fit technology. Testing has shown that it has good joint strength. By using micro-EDM, the on-the-machine assembly technology of micro transmission parts is accomplished successfully. This assembly technology is very simple and only a few steps are required. Nevertheless, a very high positioning accuracy is maintained.

Original languageEnglish
Title of host publicationProceedings of the 15th International Symposium on Electromachining, ISEM 2007
PublisherIndustrial and Management Systems Engineering
Pages631-634
Number of pages4
ISBN (Electronic)0979497701, 9780979497704
Publication statusPublished - 2007
Event15th International Symposium on Electromachining, ISEM 2007 - Pittsburgh, United States
Duration: 2007 Apr 232007 Apr 27

Other

Other15th International Symposium on Electromachining, ISEM 2007
CountryUnited States
CityPittsburgh
Period07/4/2307/4/27

    Fingerprint

Keywords

  • Micro assembly
  • Micro EDM
  • Micro gear
  • Micro screw
  • Micro wire-EDM

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Cite this

Lin, C. S., Liao, Y. S., & Chen, S. T. (2007). Micro screw pin assembly and on-the-machine assembly technologies. In Proceedings of the 15th International Symposium on Electromachining, ISEM 2007 (pp. 631-634). Industrial and Management Systems Engineering.