Low cost multifunctional 3D printed image quality and dose verification phantom for an image-guided radiotherapy system

Jian Kuen Wu, Min Chin Yu, Shih Han Chen, Shu Hsien Liao, Yu Jen Wang*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Purpose Image-guided radiation therapy (IGRT) is used to precisely deliver radiation to a tumour to reduce the possible damage to the surrounding normal tissues. Clinics use various quality assurance (QA) equipment to ensure that the performance of the IGRT system meets the international standards set for the system. The objective of this study was to develop a low-cost and multipurpose module for evaluating image quality and dose. Methods A multipurpose phantom was designed to meet the clinical requirements of high accuracy, easy setup, and calibration. The outer shell of the phantom was fabricated using acrylic. Three dimensional (3D) printing technology was used to fabricate inner slabs with the characteristics of high spatial resolution, low-contrast detectability, a 3D grid, and liquid-filled uniformity. All materials were compatible with magnetic resonance (MR). Computed tomography (CT) simulator and linear accelerator (LINAC) modules were developed and validated. Results The uniformity slab filled with water is ideal for the assessment of Hounsfield units, whereas that filled with wax is suitable for consistency checks. The high-spatial-resolution slab enables measurements with a resolution up to 5 lp/cm. The low-contrast detectability slab contains rods of 5 different sizes that can be clearly visualised. These components meet the American College of Radiology (ACR) standards for QA of CT simulators and LINACs. Conclusions The multifunctional phantom module meets the ACR recommended QA guidelines and is suitable for both LINACs and CT-sim. Further measurements in an MR simulator and an MR linear accelerator (MR-LINAC) will be arranged in the future.

Original languageEnglish
Article numbere0266604
JournalPloS one
Volume17
Issue number4 April
DOIs
Publication statusPublished - 2022 Apr

ASJC Scopus subject areas

  • General

Fingerprint

Dive into the research topics of 'Low cost multifunctional 3D printed image quality and dose verification phantom for an image-guided radiotherapy system'. Together they form a unique fingerprint.

Cite this