In vitro estimation of glenohumeral joint center of rotation

Jia Hao Chang, Ar Tyan Hsu, Guan Liang Chang

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The purposes of this study were to calculate and verify the center of rotation (COR) using least squares method and to determine the displacement of the humeral head during passive abduction movements of the glenohumeral joint. A hinge and pivot joint model with a reflective marker triad rigidly attached was used to verify the accuracy of the COR estimation. Eleven fresh cadaver shoulder specimens with reflective markers attached to the humerus were used to find the COR of the glenohumeral joint. A 6-camera motion analysis system (Vicon 370) was used to monitor the trajectories of these reflective markers. In the hinge joint model, the errors between the estimated COR and the real COR were 0.25, 0.13 and 0.88 mm in the x-, y- and z-directions, respectively. In the cadaver model, the means of standard deviation of the estimated COR in the x-, y- and z-directions were 1.16, 0.72 and 1.12 mm, respectively. Since reflective markers were attached rigidly on the humerus, the error caused by the skin movements could be ignored. The results showed that the least squares method is suitable for determining the COR of the glenohumeral joint in vitro.

Original languageEnglish
Pages (from-to)191-195
Number of pages5
JournalJournal of Medical and Biological Engineering
Volume28
Issue number4
Publication statusPublished - 2008 Dec 1

    Fingerprint

Keywords

  • Center of rotation
  • Glenohumeral joint
  • In vitro
  • Least squares method
  • Shoulder

ASJC Scopus subject areas

  • Biomedical Engineering

Cite this