High Quality of 0.18μm CMOS 5.2GHz cascode LNA for RFID tag applications

Hsin Chia Yang, Ssu Hao Peng, Shea Jue Wang, Mu Chun Wang, Chun Wei Lian, Jie Min Yang, Hung I. Chin, Chuan-Hsi Liu

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Abstract

An operation in 1.8V supply voltage single-ended cascode low-noise amplifier (LNA) structure was launched. This designed circuit provided the lower noise figure and matched the suitable LC tank to enhance the central operating frequency as well as the excellent input and output impedance matching incorporated into this LNA circuit. In this simulation, the Agilent ADS (Advanced Design System) simulation software and tsmc 0.18 μm CMOS process parameters were adopted to achieve the low-cost characteristics and high integration to fit the performance of 5.2 GHz LNA design under IEEE 802.11a specification. Due to the precise calculation gaining the good impedance matching, the simulation results showed the forward gain (S21) about 12.96dB, as well as less than-15dB isolation (S12). The input impedance (S11) and the output impedance (S22) also represented good performance. In addition, the minimum noise figure and the signal linearity performance were quite good, so that this LNA circuit was better in the availability and possibility of RFID tags.

Original languageEnglish
Pages313-316
Number of pages4
DOIs
Publication statusPublished - 2013 May 27
Event2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013 - Kaohsiung, Taiwan
Duration: 2013 Feb 252013 Feb 26

Other

Other2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013
CountryTaiwan
CityKaohsiung
Period13/2/2513/2/26

Fingerprint

Low noise amplifiers
Radio frequency identification (RFID)
Noise figure
Networks (circuits)
Availability
Specifications
Cascode amplifiers
Electric potential
Costs

Keywords

  • 802.11a
  • cascode
  • gain
  • impedance matching
  • isolation
  • LNA
  • noise figure

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Yang, H. C., Peng, S. H., Wang, S. J., Wang, M. C., Lian, C. W., Yang, J. M., ... Liu, C-H. (2013). High Quality of 0.18μm CMOS 5.2GHz cascode LNA for RFID tag applications. 313-316. Paper presented at 2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013, Kaohsiung, Taiwan. https://doi.org/10.1109/ISNE.2013.6512354

High Quality of 0.18μm CMOS 5.2GHz cascode LNA for RFID tag applications. / Yang, Hsin Chia; Peng, Ssu Hao; Wang, Shea Jue; Wang, Mu Chun; Lian, Chun Wei; Yang, Jie Min; Chin, Hung I.; Liu, Chuan-Hsi.

2013. 313-316 Paper presented at 2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013, Kaohsiung, Taiwan.

Research output: Contribution to conferencePaper

Yang, HC, Peng, SH, Wang, SJ, Wang, MC, Lian, CW, Yang, JM, Chin, HI & Liu, C-H 2013, 'High Quality of 0.18μm CMOS 5.2GHz cascode LNA for RFID tag applications', Paper presented at 2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013, Kaohsiung, Taiwan, 13/2/25 - 13/2/26 pp. 313-316. https://doi.org/10.1109/ISNE.2013.6512354
Yang HC, Peng SH, Wang SJ, Wang MC, Lian CW, Yang JM et al. High Quality of 0.18μm CMOS 5.2GHz cascode LNA for RFID tag applications. 2013. Paper presented at 2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013, Kaohsiung, Taiwan. https://doi.org/10.1109/ISNE.2013.6512354
Yang, Hsin Chia ; Peng, Ssu Hao ; Wang, Shea Jue ; Wang, Mu Chun ; Lian, Chun Wei ; Yang, Jie Min ; Chin, Hung I. ; Liu, Chuan-Hsi. / High Quality of 0.18μm CMOS 5.2GHz cascode LNA for RFID tag applications. Paper presented at 2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013, Kaohsiung, Taiwan.4 p.
@conference{aa784bc2b4394a81b73594eb92a41832,
title = "High Quality of 0.18μm CMOS 5.2GHz cascode LNA for RFID tag applications",
abstract = "An operation in 1.8V supply voltage single-ended cascode low-noise amplifier (LNA) structure was launched. This designed circuit provided the lower noise figure and matched the suitable LC tank to enhance the central operating frequency as well as the excellent input and output impedance matching incorporated into this LNA circuit. In this simulation, the Agilent ADS (Advanced Design System) simulation software and tsmc 0.18 μm CMOS process parameters were adopted to achieve the low-cost characteristics and high integration to fit the performance of 5.2 GHz LNA design under IEEE 802.11a specification. Due to the precise calculation gaining the good impedance matching, the simulation results showed the forward gain (S21) about 12.96dB, as well as less than-15dB isolation (S12). The input impedance (S11) and the output impedance (S22) also represented good performance. In addition, the minimum noise figure and the signal linearity performance were quite good, so that this LNA circuit was better in the availability and possibility of RFID tags.",
keywords = "802.11a, cascode, gain, impedance matching, isolation, LNA, noise figure",
author = "Yang, {Hsin Chia} and Peng, {Ssu Hao} and Wang, {Shea Jue} and Wang, {Mu Chun} and Lian, {Chun Wei} and Yang, {Jie Min} and Chin, {Hung I.} and Chuan-Hsi Liu",
year = "2013",
month = "5",
day = "27",
doi = "10.1109/ISNE.2013.6512354",
language = "English",
pages = "313--316",
note = "2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013 ; Conference date: 25-02-2013 Through 26-02-2013",

}

TY - CONF

T1 - High Quality of 0.18μm CMOS 5.2GHz cascode LNA for RFID tag applications

AU - Yang, Hsin Chia

AU - Peng, Ssu Hao

AU - Wang, Shea Jue

AU - Wang, Mu Chun

AU - Lian, Chun Wei

AU - Yang, Jie Min

AU - Chin, Hung I.

AU - Liu, Chuan-Hsi

PY - 2013/5/27

Y1 - 2013/5/27

N2 - An operation in 1.8V supply voltage single-ended cascode low-noise amplifier (LNA) structure was launched. This designed circuit provided the lower noise figure and matched the suitable LC tank to enhance the central operating frequency as well as the excellent input and output impedance matching incorporated into this LNA circuit. In this simulation, the Agilent ADS (Advanced Design System) simulation software and tsmc 0.18 μm CMOS process parameters were adopted to achieve the low-cost characteristics and high integration to fit the performance of 5.2 GHz LNA design under IEEE 802.11a specification. Due to the precise calculation gaining the good impedance matching, the simulation results showed the forward gain (S21) about 12.96dB, as well as less than-15dB isolation (S12). The input impedance (S11) and the output impedance (S22) also represented good performance. In addition, the minimum noise figure and the signal linearity performance were quite good, so that this LNA circuit was better in the availability and possibility of RFID tags.

AB - An operation in 1.8V supply voltage single-ended cascode low-noise amplifier (LNA) structure was launched. This designed circuit provided the lower noise figure and matched the suitable LC tank to enhance the central operating frequency as well as the excellent input and output impedance matching incorporated into this LNA circuit. In this simulation, the Agilent ADS (Advanced Design System) simulation software and tsmc 0.18 μm CMOS process parameters were adopted to achieve the low-cost characteristics and high integration to fit the performance of 5.2 GHz LNA design under IEEE 802.11a specification. Due to the precise calculation gaining the good impedance matching, the simulation results showed the forward gain (S21) about 12.96dB, as well as less than-15dB isolation (S12). The input impedance (S11) and the output impedance (S22) also represented good performance. In addition, the minimum noise figure and the signal linearity performance were quite good, so that this LNA circuit was better in the availability and possibility of RFID tags.

KW - 802.11a

KW - cascode

KW - gain

KW - impedance matching

KW - isolation

KW - LNA

KW - noise figure

UR - http://www.scopus.com/inward/record.url?scp=84877985776&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84877985776&partnerID=8YFLogxK

U2 - 10.1109/ISNE.2013.6512354

DO - 10.1109/ISNE.2013.6512354

M3 - Paper

AN - SCOPUS:84877985776

SP - 313

EP - 316

ER -