Fabrication of diffractive microlens array by femtosecond laser-assisted etching process

Shao Wei Luo, Tien Li Chang, Hung Yin Tsai

Research output: Contribution to journalArticle

13 Citations (Scopus)

Abstract

The study presents the fabrication of diffractive microlens array on glass substrate by using the femtosecond laser (FS-laser) and chemical etching process. Here, the laser is based on an all-in-one FS-laser system with the central wavelength of 517 ± 2.5 nm for fabricating the embedded grating structures inside glass substrate. The laser beam focused distance between the surface and sample is 25 μm. The repetition rate and pulse duration of FS-laser are 100 kHz and 350 fs, respectively. The attenuated laser beam is directly into objective lens (20×) with the numerical apertures (NA = 0.4). Hence, the microstructures can be patterned by the routes of X-Y motion stage. The glass sample is then etched by hydrofluoric acid (HF) in an ultrasonic bath for 15 min for developing structures. Finally, the results show a successful process for forming the microlens array of the diffractive patterns, in which two types of cross and octagon are obtained from the single and double diffraction, respectively.

Original languageEnglish
Pages (from-to)448-452
Number of pages5
JournalMicroelectronic Engineering
Volume98
DOIs
Publication statusPublished - 2012 Oct 1

    Fingerprint

Keywords

  • Diffraction grating
  • Etching
  • Femtosecond laser
  • Glass modification
  • Microlens array

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Electrical and Electronic Engineering

Cite this