Effect of sintering temperature on the photoluminescence characteristics of the Nd2O3-doped SnSiO4 phosphor

Chien Chen Diao; Jing Liu; Cheng Fu Yang; Chin Guo Kuo; Cheng Yi Chen; Yun I. Ho

doi:10.1109/ICAMSE.2016.7840305

Effect of sintering temperature on the photoluminescence characteristics of the Nd₂O₃-doped SnSiO₄ phosphor

Chien Chen Diao, Jing Liu, Cheng Fu Yang^*, Chin Guo Kuo, Cheng Yi Chen, Yun I. Ho

^*Corresponding author for this work

Department of Industrial Education

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Abstract

In this study, Nd₂O₃ was used as the dopant and the commercial Sr₂SiO₄:Nd phosphors was produced by using solid-state reaction method. The Sr₂SiO₄:Nd phosphors was sintered at the temperature range of 1000°C∼1300°C for 2 h. From the results of X-ray diffraction patterns, even sintered at 1000°C only Sr₂SiO₄ phase was observed, no secondary and unknown phases were residual in the calcined Sr₂SiO₄:Nd powders. We had found that the sintering temperature had large effect on the luminescence characteristics of the Nd₂O₃-doped Sr₂SiO₄ phosphors. The CIE colorimetric data of Sr₂SiO₄:Nd phosphors as a function of sintering temperature was also investigated in this study. We found that the Sr₂SiO₄:Nd phosphors revealed a dark blue or a ultraviolet light.

Original language	English
Title of host publication	Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering
Subtitle of host publication	Innovation, Science and Engineering, IEEE-ICAMSE 2016
Editors	Teen-Hang Meen, Stephen D. Prior, Artde Donald Kin-Tak Lam
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	263-266
Number of pages	4
ISBN (Electronic)	9781509038695
DOIs	https://doi.org/10.1109/ICAMSE.2016.7840305
Publication status	Published - 2017 Feb 2
Event	2016 IEEE International Conference on Advanced Materials for Science and Engineering, IEEE-ICAMSE 2016 - Tainan, Taiwan Duration: 2016 Nov 12 → 2016 Nov 13

Publication series

Name	Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016

Other

Other	2016 IEEE International Conference on Advanced Materials for Science and Engineering, IEEE-ICAMSE 2016
Country/Territory	Taiwan
City	Tainan
Period	2016/11/12 → 2016/11/13

Keywords

Phosphors
Photoluminescence
Sintering Temperature
SrSiO

ASJC Scopus subject areas

Hardware and Architecture
Civil and Structural Engineering
Mechanics of Materials
Media Technology
Materials Science (miscellaneous)
Electronic, Optical and Magnetic Materials

Access to Document

10.1109/ICAMSE.2016.7840305

Cite this

Diao, C. C., Liu, J., Yang, C. F., Kuo, C. G., Chen, C. Y., & Ho, Y. I. (2017). Effect of sintering temperature on the photoluminescence characteristics of the Nd₂O₃-doped SnSiO₄ phosphor. In T.-H. Meen, S. D. Prior, & A. D. K.-T. Lam (Eds.), Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016 (pp. 263-266). Article 7840305 (Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICAMSE.2016.7840305

Effect of sintering temperature on the photoluminescence characteristics of the Nd₂O₃-doped SnSiO₄ phosphor. / Diao, Chien Chen; Liu, Jing; Yang, Cheng Fu et al.
Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016. ed. / Teen-Hang Meen; Stephen D. Prior; Artde Donald Kin-Tak Lam. Institute of Electrical and Electronics Engineers Inc., 2017. p. 263-266 7840305 (Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Diao, CC, Liu, J, Yang, CF, Kuo, CG, Chen, CY & Ho, YI 2017, Effect of sintering temperature on the photoluminescence characteristics of the Nd₂O₃-doped SnSiO₄ phosphor. in T-H Meen, SD Prior & ADK-T Lam (eds), Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016., 7840305, Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016, Institute of Electrical and Electronics Engineers Inc., pp. 263-266, 2016 IEEE International Conference on Advanced Materials for Science and Engineering, IEEE-ICAMSE 2016, Tainan, Taiwan, 2016/11/12. https://doi.org/10.1109/ICAMSE.2016.7840305

Diao CC, Liu J, Yang CF, Kuo CG, Chen CY, Ho YI. Effect of sintering temperature on the photoluminescence characteristics of the Nd₂O₃-doped SnSiO₄ phosphor. In Meen TH, Prior SD, Lam ADKT, editors, Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016. Institute of Electrical and Electronics Engineers Inc. 2017. p. 263-266. 7840305. (Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016). doi: 10.1109/ICAMSE.2016.7840305

Diao, Chien Chen ; Liu, Jing ; Yang, Cheng Fu et al. / Effect of sintering temperature on the photoluminescence characteristics of the Nd₂O₃-doped SnSiO₄ phosphor. Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016. editor / Teen-Hang Meen ; Stephen D. Prior ; Artde Donald Kin-Tak Lam. Institute of Electrical and Electronics Engineers Inc., 2017. pp. 263-266 (Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016).

@inproceedings{9ca287b742314f84b499661d00cfa9b4,

title = "Effect of sintering temperature on the photoluminescence characteristics of the Nd2O3-doped SnSiO4 phosphor",

abstract = "In this study, Nd2O3 was used as the dopant and the commercial Sr2SiO4:Nd phosphors was produced by using solid-state reaction method. The Sr2SiO4:Nd phosphors was sintered at the temperature range of 1000°C∼1300°C for 2 h. From the results of X-ray diffraction patterns, even sintered at 1000°C only Sr2SiO4 phase was observed, no secondary and unknown phases were residual in the calcined Sr2SiO4:Nd powders. We had found that the sintering temperature had large effect on the luminescence characteristics of the Nd2O3-doped Sr2SiO4 phosphors. The CIE colorimetric data of Sr2SiO4:Nd phosphors as a function of sintering temperature was also investigated in this study. We found that the Sr2SiO4:Nd phosphors revealed a dark blue or a ultraviolet light.",

keywords = "Phosphors, Photoluminescence, Sintering Temperature, SrSiO",

author = "Diao, {Chien Chen} and Jing Liu and Yang, {Cheng Fu} and Kuo, {Chin Guo} and Chen, {Cheng Yi} and Ho, {Yun I.}",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 2016 IEEE International Conference on Advanced Materials for Science and Engineering, IEEE-ICAMSE 2016 ; Conference date: 12-11-2016 Through 13-11-2016",

year = "2017",

month = feb,

day = "2",

doi = "10.1109/ICAMSE.2016.7840305",

language = "English",

series = "Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "263--266",

editor = "Teen-Hang Meen and Prior, {Stephen D.} and Lam, {Artde Donald Kin-Tak}",

booktitle = "Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering",

}

TY - GEN

T1 - Effect of sintering temperature on the photoluminescence characteristics of the Nd2O3-doped SnSiO4 phosphor

AU - Diao, Chien Chen

AU - Liu, Jing

AU - Yang, Cheng Fu

AU - Kuo, Chin Guo

AU - Chen, Cheng Yi

AU - Ho, Yun I.

PY - 2017/2/2

Y1 - 2017/2/2

N2 - In this study, Nd2O3 was used as the dopant and the commercial Sr2SiO4:Nd phosphors was produced by using solid-state reaction method. The Sr2SiO4:Nd phosphors was sintered at the temperature range of 1000°C∼1300°C for 2 h. From the results of X-ray diffraction patterns, even sintered at 1000°C only Sr2SiO4 phase was observed, no secondary and unknown phases were residual in the calcined Sr2SiO4:Nd powders. We had found that the sintering temperature had large effect on the luminescence characteristics of the Nd2O3-doped Sr2SiO4 phosphors. The CIE colorimetric data of Sr2SiO4:Nd phosphors as a function of sintering temperature was also investigated in this study. We found that the Sr2SiO4:Nd phosphors revealed a dark blue or a ultraviolet light.

AB - In this study, Nd2O3 was used as the dopant and the commercial Sr2SiO4:Nd phosphors was produced by using solid-state reaction method. The Sr2SiO4:Nd phosphors was sintered at the temperature range of 1000°C∼1300°C for 2 h. From the results of X-ray diffraction patterns, even sintered at 1000°C only Sr2SiO4 phase was observed, no secondary and unknown phases were residual in the calcined Sr2SiO4:Nd powders. We had found that the sintering temperature had large effect on the luminescence characteristics of the Nd2O3-doped Sr2SiO4 phosphors. The CIE colorimetric data of Sr2SiO4:Nd phosphors as a function of sintering temperature was also investigated in this study. We found that the Sr2SiO4:Nd phosphors revealed a dark blue or a ultraviolet light.

KW - Phosphors

KW - Photoluminescence

KW - Sintering Temperature

KW - SrSiO

UR - http://www.scopus.com/inward/record.url?scp=85015215167&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85015215167&partnerID=8YFLogxK

U2 - 10.1109/ICAMSE.2016.7840305

DO - 10.1109/ICAMSE.2016.7840305

M3 - Conference contribution

AN - SCOPUS:85015215167

T3 - Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering: Innovation, Science and Engineering, IEEE-ICAMSE 2016

SP - 263

EP - 266

BT - Proceedings of the IEEE International Conference on Advanced Materials for Science and Engineering

A2 - Meen, Teen-Hang

A2 - Prior, Stephen D.

A2 - Lam, Artde Donald Kin-Tak

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2016 IEEE International Conference on Advanced Materials for Science and Engineering, IEEE-ICAMSE 2016

Y2 - 12 November 2016 through 13 November 2016

ER -