Development of an interactive e-learning system to improve manufacturing technology education

Min Jou, Han Wei Zhang, Chia Wan Lin

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

The manufacturing technique covers: turning, milling, drilling, holing ...etc. Much time and cost are used to teach these techniques. Particularly, computerized machines are continuously increasing in use. The development of educating engineers on computerized machines becomes much more difficult than with traditional machines. This is because of the limitation of the extremely expensive cost of teaching. The quality and quantity of teaching cannot always be promoted in this respect. The traditional teaching methods can not respond well to the needs of the future. Therefore, this research aims to the following topics; (1). Propose the teaching strategies for the students to learning machining processing planning through web-based learning system. (2). Establish on-line teaching material for the computer-aided manufacturing courses including CMC coding method, CNC simulation. (3). Develop the virtual machining laboratory to bring the machining practical training to web-based learning system. (4). Integrate multi-media and virtual laboratory in the developed e-learning web-based system to enhance the effectiveness of machining education through web-based system.

Original languageEnglish
Title of host publicationProceedings - 5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005
Pages359-360
Number of pages2
Volume2005
DOIs
Publication statusPublished - 2005
Event5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005 - Kaohsiung, Taiwan
Duration: 2005 Jul 52005 Jul 8

Other

Other5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005
CountryTaiwan
CityKaohsiung
Period05/7/505/7/8

Fingerprint

Learning systems
Teaching
Education
Machining
Milling (machining)
Computer aided manufacturing
Costs
Drilling
Students
Engineers
Planning
Processing

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Jou, M., Zhang, H. W., & Lin, C. W. (2005). Development of an interactive e-learning system to improve manufacturing technology education. In Proceedings - 5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005 (Vol. 2005, pp. 359-360). [1508698] https://doi.org/10.1109/ICALT.2005.121

Development of an interactive e-learning system to improve manufacturing technology education. / Jou, Min; Zhang, Han Wei; Lin, Chia Wan.

Proceedings - 5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005. Vol. 2005 2005. p. 359-360 1508698.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jou, M, Zhang, HW & Lin, CW 2005, Development of an interactive e-learning system to improve manufacturing technology education. in Proceedings - 5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005. vol. 2005, 1508698, pp. 359-360, 5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005, Kaohsiung, Taiwan, 05/7/5. https://doi.org/10.1109/ICALT.2005.121
Jou M, Zhang HW, Lin CW. Development of an interactive e-learning system to improve manufacturing technology education. In Proceedings - 5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005. Vol. 2005. 2005. p. 359-360. 1508698 https://doi.org/10.1109/ICALT.2005.121
Jou, Min ; Zhang, Han Wei ; Lin, Chia Wan. / Development of an interactive e-learning system to improve manufacturing technology education. Proceedings - 5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005. Vol. 2005 2005. pp. 359-360
@inproceedings{e23fc67bd6484f6abf7667fbdb47eebf,
title = "Development of an interactive e-learning system to improve manufacturing technology education",
abstract = "The manufacturing technique covers: turning, milling, drilling, holing ...etc. Much time and cost are used to teach these techniques. Particularly, computerized machines are continuously increasing in use. The development of educating engineers on computerized machines becomes much more difficult than with traditional machines. This is because of the limitation of the extremely expensive cost of teaching. The quality and quantity of teaching cannot always be promoted in this respect. The traditional teaching methods can not respond well to the needs of the future. Therefore, this research aims to the following topics; (1). Propose the teaching strategies for the students to learning machining processing planning through web-based learning system. (2). Establish on-line teaching material for the computer-aided manufacturing courses including CMC coding method, CNC simulation. (3). Develop the virtual machining laboratory to bring the machining practical training to web-based learning system. (4). Integrate multi-media and virtual laboratory in the developed e-learning web-based system to enhance the effectiveness of machining education through web-based system.",
author = "Min Jou and Zhang, {Han Wei} and Lin, {Chia Wan}",
year = "2005",
doi = "10.1109/ICALT.2005.121",
language = "English",
isbn = "0769523382",
volume = "2005",
pages = "359--360",
booktitle = "Proceedings - 5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005",

}

TY - GEN

T1 - Development of an interactive e-learning system to improve manufacturing technology education

AU - Jou, Min

AU - Zhang, Han Wei

AU - Lin, Chia Wan

PY - 2005

Y1 - 2005

N2 - The manufacturing technique covers: turning, milling, drilling, holing ...etc. Much time and cost are used to teach these techniques. Particularly, computerized machines are continuously increasing in use. The development of educating engineers on computerized machines becomes much more difficult than with traditional machines. This is because of the limitation of the extremely expensive cost of teaching. The quality and quantity of teaching cannot always be promoted in this respect. The traditional teaching methods can not respond well to the needs of the future. Therefore, this research aims to the following topics; (1). Propose the teaching strategies for the students to learning machining processing planning through web-based learning system. (2). Establish on-line teaching material for the computer-aided manufacturing courses including CMC coding method, CNC simulation. (3). Develop the virtual machining laboratory to bring the machining practical training to web-based learning system. (4). Integrate multi-media and virtual laboratory in the developed e-learning web-based system to enhance the effectiveness of machining education through web-based system.

AB - The manufacturing technique covers: turning, milling, drilling, holing ...etc. Much time and cost are used to teach these techniques. Particularly, computerized machines are continuously increasing in use. The development of educating engineers on computerized machines becomes much more difficult than with traditional machines. This is because of the limitation of the extremely expensive cost of teaching. The quality and quantity of teaching cannot always be promoted in this respect. The traditional teaching methods can not respond well to the needs of the future. Therefore, this research aims to the following topics; (1). Propose the teaching strategies for the students to learning machining processing planning through web-based learning system. (2). Establish on-line teaching material for the computer-aided manufacturing courses including CMC coding method, CNC simulation. (3). Develop the virtual machining laboratory to bring the machining practical training to web-based learning system. (4). Integrate multi-media and virtual laboratory in the developed e-learning web-based system to enhance the effectiveness of machining education through web-based system.

UR - http://www.scopus.com/inward/record.url?scp=33749045675&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33749045675&partnerID=8YFLogxK

U2 - 10.1109/ICALT.2005.121

DO - 10.1109/ICALT.2005.121

M3 - Conference contribution

AN - SCOPUS:33749045675

SN - 0769523382

SN - 9780769523385

VL - 2005

SP - 359

EP - 360

BT - Proceedings - 5th IEEE International Conference on Advanced Learning Technologies, ICALT 2005

ER -