Development of a reverse micro EDM-drilling for holing diamond-tool

Shun Tong Chen, Zong Han Jiang, Yi Ying Wu, Hong Ye Yang

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This study presents the development of a drilling technique for an innovative tabletop drilling machine that combines micro-EDM with drilling to fabricate micro-holes in diamond-tool. The mechanisms designs of double V-shaped bearings and double spindles which provide a precision clamping and vertical alignment for diamond-tool and micro-tube are devised to enable to machine a co-centric micro-hole for micro-tool. A diamond-tool, made with copper-based sintered alloy, is drilled by using the developed technique of co-centric micro-hole EDM-drilling into a hollow shaft which can create equilibrium of drilling forces, prevent a drilling squeezing to be occurred and enable to offer a temporary storing space for drilling chips. Relative experiments including the determinations of drilling ratio and discharge capacitance are carried out via this established machine. Experimental results show that excellent geometric and dimensional accuracy of micro-holes on the diamond-tool can be achieved

Original languageEnglish
Title of host publicationAdvances in Abrasive Technology XIII
PublisherTrans Tech Publications Ltd
Pages802-807
Number of pages6
ISBN (Print)9780878492428
DOIs
Publication statusPublished - 2010 Jan 1

Publication series

NameAdvanced Materials Research
Volume126-128
ISSN (Print)1022-6680

Keywords

  • Optical grade glass
  • Reverse co-centric micro-hole EDM-drilling

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Development of a reverse micro EDM-drilling for holing diamond-tool'. Together they form a unique fingerprint.

Cite this