Design and implementation of high-performance and cost-effective white-light interferometric profile measurement systems

Gao-Wei Chang, Yu Hsuan Lin, Chi Cheng Kuan

Research output: Contribution to journalConference article

1 Citation (Scopus)

Abstract

White light interferometry (WLI) has played an important role in nano- and micro-scale profile measurement technology. To meet the demand of high-accuracy, high-repeatability, and cost-effective measurement, the research activities on WLI and its applications are rapidly in progress. WLI is based on the superposition of waves with different but very close wavelengths to produce beat phenomena (or to generate detectable envelopes in the interferogram) and then to identify the locations of the zero-order interference fringes (or those of the maximum intensities of interference fringes without the optical path difference). The locations reflect the information of three dimensional (3D) surface profiles from the consecutively acquired images in a WLI system. The objective of this paper is to develop a high-accuracy and cost-effective WLI measurement system, especially for the surfaces of micro-mechatronic devices, micro-optical components, semiconductor devices, etc. In our approach, the feasibility of the use of spectral coherence properties to meet the system design requirement is first investigated. Specifically, proper spectral filters are employed to enhance the coherence length of the light source (i.e., that of the filtered light source) to an order of ten micrometers. Then, a Young's double-slit interference experiment with filtered and unfiltered white light sources is conducted to demonstrate the effectiveness of this technique. Also, we adopt a Michelson interferometric configuration as the optical module of the proposed WLI system, for the sake of its simplicity. Experimental results indicate that several inexpensive spectral filters, a lower-grade charge-couple-device (CCD) image sensor, and a PZT (piezoelectric transducer) with a lower movement resolution are merely needed to develop the WLI system, instead of the use of higher-grade optical and optomechanical components. It turns out that the proposed system with high-accuracy measurement performance is more cost-effective than others.

Original languageEnglish
Article number58781C
Pages (from-to)1-10
Number of pages10
JournalProceedings of SPIE - The International Society for Optical Engineering
Volume5878
DOIs
Publication statusPublished - 2005 Dec 29
EventAdvanced Characterization Techniques for Optics, Semiconductors, and Nanotechnologies II - San Diego, CA, United States
Duration: 2005 Aug 22005 Aug 4

Fingerprint

White Light Interferometry
Measurement System
Interferometry
interferometry
High Performance
costs
Costs
profiles
Light sources
High Accuracy
Interference
light sources
interference
grade
Filter
Interferogram
Surface Profile
Mechatronics
Piezoelectric transducers
Image Sensor

Keywords

  • Spectral coherence
  • White-light interferometry

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Cite this

Design and implementation of high-performance and cost-effective white-light interferometric profile measurement systems. / Chang, Gao-Wei; Lin, Yu Hsuan; Kuan, Chi Cheng.

In: Proceedings of SPIE - The International Society for Optical Engineering, Vol. 5878, 58781C, 29.12.2005, p. 1-10.

Research output: Contribution to journalConference article

@article{4a6dfe49069345dda8f819c01b73b202,
title = "Design and implementation of high-performance and cost-effective white-light interferometric profile measurement systems",
abstract = "White light interferometry (WLI) has played an important role in nano- and micro-scale profile measurement technology. To meet the demand of high-accuracy, high-repeatability, and cost-effective measurement, the research activities on WLI and its applications are rapidly in progress. WLI is based on the superposition of waves with different but very close wavelengths to produce beat phenomena (or to generate detectable envelopes in the interferogram) and then to identify the locations of the zero-order interference fringes (or those of the maximum intensities of interference fringes without the optical path difference). The locations reflect the information of three dimensional (3D) surface profiles from the consecutively acquired images in a WLI system. The objective of this paper is to develop a high-accuracy and cost-effective WLI measurement system, especially for the surfaces of micro-mechatronic devices, micro-optical components, semiconductor devices, etc. In our approach, the feasibility of the use of spectral coherence properties to meet the system design requirement is first investigated. Specifically, proper spectral filters are employed to enhance the coherence length of the light source (i.e., that of the filtered light source) to an order of ten micrometers. Then, a Young's double-slit interference experiment with filtered and unfiltered white light sources is conducted to demonstrate the effectiveness of this technique. Also, we adopt a Michelson interferometric configuration as the optical module of the proposed WLI system, for the sake of its simplicity. Experimental results indicate that several inexpensive spectral filters, a lower-grade charge-couple-device (CCD) image sensor, and a PZT (piezoelectric transducer) with a lower movement resolution are merely needed to develop the WLI system, instead of the use of higher-grade optical and optomechanical components. It turns out that the proposed system with high-accuracy measurement performance is more cost-effective than others.",
keywords = "Spectral coherence, White-light interferometry",
author = "Gao-Wei Chang and Lin, {Yu Hsuan} and Kuan, {Chi Cheng}",
year = "2005",
month = "12",
day = "29",
doi = "10.1117/12.616765",
language = "English",
volume = "5878",
pages = "1--10",
journal = "Proceedings of SPIE - The International Society for Optical Engineering",
issn = "0277-786X",
publisher = "SPIE",

}

TY - JOUR

T1 - Design and implementation of high-performance and cost-effective white-light interferometric profile measurement systems

AU - Chang, Gao-Wei

AU - Lin, Yu Hsuan

AU - Kuan, Chi Cheng

PY - 2005/12/29

Y1 - 2005/12/29

N2 - White light interferometry (WLI) has played an important role in nano- and micro-scale profile measurement technology. To meet the demand of high-accuracy, high-repeatability, and cost-effective measurement, the research activities on WLI and its applications are rapidly in progress. WLI is based on the superposition of waves with different but very close wavelengths to produce beat phenomena (or to generate detectable envelopes in the interferogram) and then to identify the locations of the zero-order interference fringes (or those of the maximum intensities of interference fringes without the optical path difference). The locations reflect the information of three dimensional (3D) surface profiles from the consecutively acquired images in a WLI system. The objective of this paper is to develop a high-accuracy and cost-effective WLI measurement system, especially for the surfaces of micro-mechatronic devices, micro-optical components, semiconductor devices, etc. In our approach, the feasibility of the use of spectral coherence properties to meet the system design requirement is first investigated. Specifically, proper spectral filters are employed to enhance the coherence length of the light source (i.e., that of the filtered light source) to an order of ten micrometers. Then, a Young's double-slit interference experiment with filtered and unfiltered white light sources is conducted to demonstrate the effectiveness of this technique. Also, we adopt a Michelson interferometric configuration as the optical module of the proposed WLI system, for the sake of its simplicity. Experimental results indicate that several inexpensive spectral filters, a lower-grade charge-couple-device (CCD) image sensor, and a PZT (piezoelectric transducer) with a lower movement resolution are merely needed to develop the WLI system, instead of the use of higher-grade optical and optomechanical components. It turns out that the proposed system with high-accuracy measurement performance is more cost-effective than others.

AB - White light interferometry (WLI) has played an important role in nano- and micro-scale profile measurement technology. To meet the demand of high-accuracy, high-repeatability, and cost-effective measurement, the research activities on WLI and its applications are rapidly in progress. WLI is based on the superposition of waves with different but very close wavelengths to produce beat phenomena (or to generate detectable envelopes in the interferogram) and then to identify the locations of the zero-order interference fringes (or those of the maximum intensities of interference fringes without the optical path difference). The locations reflect the information of three dimensional (3D) surface profiles from the consecutively acquired images in a WLI system. The objective of this paper is to develop a high-accuracy and cost-effective WLI measurement system, especially for the surfaces of micro-mechatronic devices, micro-optical components, semiconductor devices, etc. In our approach, the feasibility of the use of spectral coherence properties to meet the system design requirement is first investigated. Specifically, proper spectral filters are employed to enhance the coherence length of the light source (i.e., that of the filtered light source) to an order of ten micrometers. Then, a Young's double-slit interference experiment with filtered and unfiltered white light sources is conducted to demonstrate the effectiveness of this technique. Also, we adopt a Michelson interferometric configuration as the optical module of the proposed WLI system, for the sake of its simplicity. Experimental results indicate that several inexpensive spectral filters, a lower-grade charge-couple-device (CCD) image sensor, and a PZT (piezoelectric transducer) with a lower movement resolution are merely needed to develop the WLI system, instead of the use of higher-grade optical and optomechanical components. It turns out that the proposed system with high-accuracy measurement performance is more cost-effective than others.

KW - Spectral coherence

KW - White-light interferometry

UR - http://www.scopus.com/inward/record.url?scp=29244461013&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=29244461013&partnerID=8YFLogxK

U2 - 10.1117/12.616765

DO - 10.1117/12.616765

M3 - Conference article

VL - 5878

SP - 1

EP - 10

JO - Proceedings of SPIE - The International Society for Optical Engineering

JF - Proceedings of SPIE - The International Society for Optical Engineering

SN - 0277-786X

M1 - 58781C

ER -