Depressing Start-Up Current Overshoot for a Laser Headlight Driver in High-Temperature and Forward Voltage Drift Conditions

Kai Jun Pai*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

High-optical-output-power laser diodes (HOO-PLDs) are a new option for the next-generation vehicle headlights. This paper develops a laser headlight driver (LHD) combining a safety standard circuit, DC-DC converter, and feedback controller. The DC-DC converter topology is a two-switch two-diode buck-boost converter (TSTDBBC), which could be operated in both step-up or step-down conversion modes for variable battery voltage input to the LHD, enabling the driving voltage and current of the HOOPLD to be obtained from the TSTDBBC output. Because the operating ambient temperature (OAT) can cause forward voltage drift in the HOOPLD, the feedback controller could be used to stabilize the driving current to cope with forward voltage drift. Moreover, in the start-up phase, a current overshoot occurs when the TSTDBBC operation changes from the constant-voltage output mode to the constant-current output mode. This can be further aggravated when HOOPLDs operate under a high OAT. Therefore, proportional switching proportional-integral control technology was applied to the current-feedback controller to depress the current overshoot, enabling the driving current of the HOOPLDs to be maintained at the rated specification to ensure operating lifespan. Complete design procedures are presented. Simulations and experimental results validate that the proposed control technology is effective for solving the ignition problem.

Original languageEnglish
Pages (from-to)7793-7804
Number of pages12
JournalIEEE Transactions on Industrial Electronics
Volume65
Issue number10
DOIs
Publication statusPublished - 2018 Oct
Externally publishedYes

Keywords

  • Buck-boost converter
  • high-optical-output-power laser diode (HOOPLDs)
  • laser headlight
  • proportional switching proportional-integral (PSPI) control

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Depressing Start-Up Current Overshoot for a Laser Headlight Driver in High-Temperature and Forward Voltage Drift Conditions'. Together they form a unique fingerprint.

Cite this