An ultra sensitive DNA detection by using gold nanoparticle multilayer in nano-gap electrodes

Chien Ying Tsai, Tien Li Chang, Chun Chi Chen, Fu Hsiang Ko, Ping Hei Chen

Research output: Contribution to journalConference article

29 Citations (Scopus)

Abstract

This paper reports an electrical DNA detection method that detects target DNA at concentrations as low as 1 fM by using self-assembly multilayer gold nanoparticle structure between nano-gap electrodes. The distance of the gap between the electrodes is 300 nm and the height of the electrodes is 65 nm. A multilayer gold nanoparticle structure can be built on thin film of SiO 2 silicon wafer. Bifunctional organic molecules are used to build up gold nanoparticle monolayer on the wafer substrate. After hybridization among target DNA, 5′-end thiol-modified probe DNA and 3′-end thiol-modified capture DNA; a second layer of gold nanoparticle is built up through a self-assembly process between gold nanoparticles and thiol-modified end of probe DNA. When the applied voltage is the same, electrical current through multilayer gold nanoparticle structure is much greater than that through monolayered gold nanoparticle structure. Therefore, target DNA in sample solution can be detected through a significant degradation in electrical resistance from monolayered gold nanoparticle to multilayer gold nanoparticle structures. The concentration of target DNA in tested sample solutions ranges from 1 fM to 100 pM. The linear I-V curves of multilayer gold nanoparticle structures indicate the device proposed in this study can detect target DNA concentrations as low as 1 fM. Additional approaches are also suggested in this study to improve the sensitivity in DNA detection by using I-V measurements through multilayer gold nanoparticle structures.

Original languageEnglish
Pages (from-to)546-555
Number of pages10
JournalMicroelectronic Engineering
Volume78-79
Issue number1-4
DOIs
Publication statusPublished - 2005 Mar 1
EventProceedings of the 30th International Conference on Micro- and Nano-Engineering -
Duration: 2004 Sep 192004 Sep 22

Fingerprint

Gold
Multilayers
DNA
deoxyribonucleic acid
gold
Nanoparticles
nanoparticles
Electrodes
electrodes
Sulfhydryl Compounds
thiols
DNA Probes
Self assembly
self assembly
wafers
Acoustic impedance
probes
electrical resistance
Silicon wafers
Monolayers

Keywords

  • Bifunctional organic molecules
  • DNA detection
  • Gold nanoparticles
  • Monolayer
  • Multilayer
  • Self-assembly

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Electrical and Electronic Engineering

Cite this

An ultra sensitive DNA detection by using gold nanoparticle multilayer in nano-gap electrodes. / Tsai, Chien Ying; Chang, Tien Li; Chen, Chun Chi; Ko, Fu Hsiang; Chen, Ping Hei.

In: Microelectronic Engineering, Vol. 78-79, No. 1-4, 01.03.2005, p. 546-555.

Research output: Contribution to journalConference article

Tsai, Chien Ying ; Chang, Tien Li ; Chen, Chun Chi ; Ko, Fu Hsiang ; Chen, Ping Hei. / An ultra sensitive DNA detection by using gold nanoparticle multilayer in nano-gap electrodes. In: Microelectronic Engineering. 2005 ; Vol. 78-79, No. 1-4. pp. 546-555.
@article{e278e5f7dbc64bf18dba1b2d9a8dda88,
title = "An ultra sensitive DNA detection by using gold nanoparticle multilayer in nano-gap electrodes",
abstract = "This paper reports an electrical DNA detection method that detects target DNA at concentrations as low as 1 fM by using self-assembly multilayer gold nanoparticle structure between nano-gap electrodes. The distance of the gap between the electrodes is 300 nm and the height of the electrodes is 65 nm. A multilayer gold nanoparticle structure can be built on thin film of SiO 2 silicon wafer. Bifunctional organic molecules are used to build up gold nanoparticle monolayer on the wafer substrate. After hybridization among target DNA, 5′-end thiol-modified probe DNA and 3′-end thiol-modified capture DNA; a second layer of gold nanoparticle is built up through a self-assembly process between gold nanoparticles and thiol-modified end of probe DNA. When the applied voltage is the same, electrical current through multilayer gold nanoparticle structure is much greater than that through monolayered gold nanoparticle structure. Therefore, target DNA in sample solution can be detected through a significant degradation in electrical resistance from monolayered gold nanoparticle to multilayer gold nanoparticle structures. The concentration of target DNA in tested sample solutions ranges from 1 fM to 100 pM. The linear I-V curves of multilayer gold nanoparticle structures indicate the device proposed in this study can detect target DNA concentrations as low as 1 fM. Additional approaches are also suggested in this study to improve the sensitivity in DNA detection by using I-V measurements through multilayer gold nanoparticle structures.",
keywords = "Bifunctional organic molecules, DNA detection, Gold nanoparticles, Monolayer, Multilayer, Self-assembly",
author = "Tsai, {Chien Ying} and Chang, {Tien Li} and Chen, {Chun Chi} and Ko, {Fu Hsiang} and Chen, {Ping Hei}",
year = "2005",
month = "3",
day = "1",
doi = "10.1016/j.mee.2004.12.070",
language = "English",
volume = "78-79",
pages = "546--555",
journal = "Microelectronic Engineering",
issn = "0167-9317",
publisher = "Elsevier",
number = "1-4",

}

TY - JOUR

T1 - An ultra sensitive DNA detection by using gold nanoparticle multilayer in nano-gap electrodes

AU - Tsai, Chien Ying

AU - Chang, Tien Li

AU - Chen, Chun Chi

AU - Ko, Fu Hsiang

AU - Chen, Ping Hei

PY - 2005/3/1

Y1 - 2005/3/1

N2 - This paper reports an electrical DNA detection method that detects target DNA at concentrations as low as 1 fM by using self-assembly multilayer gold nanoparticle structure between nano-gap electrodes. The distance of the gap between the electrodes is 300 nm and the height of the electrodes is 65 nm. A multilayer gold nanoparticle structure can be built on thin film of SiO 2 silicon wafer. Bifunctional organic molecules are used to build up gold nanoparticle monolayer on the wafer substrate. After hybridization among target DNA, 5′-end thiol-modified probe DNA and 3′-end thiol-modified capture DNA; a second layer of gold nanoparticle is built up through a self-assembly process between gold nanoparticles and thiol-modified end of probe DNA. When the applied voltage is the same, electrical current through multilayer gold nanoparticle structure is much greater than that through monolayered gold nanoparticle structure. Therefore, target DNA in sample solution can be detected through a significant degradation in electrical resistance from monolayered gold nanoparticle to multilayer gold nanoparticle structures. The concentration of target DNA in tested sample solutions ranges from 1 fM to 100 pM. The linear I-V curves of multilayer gold nanoparticle structures indicate the device proposed in this study can detect target DNA concentrations as low as 1 fM. Additional approaches are also suggested in this study to improve the sensitivity in DNA detection by using I-V measurements through multilayer gold nanoparticle structures.

AB - This paper reports an electrical DNA detection method that detects target DNA at concentrations as low as 1 fM by using self-assembly multilayer gold nanoparticle structure between nano-gap electrodes. The distance of the gap between the electrodes is 300 nm and the height of the electrodes is 65 nm. A multilayer gold nanoparticle structure can be built on thin film of SiO 2 silicon wafer. Bifunctional organic molecules are used to build up gold nanoparticle monolayer on the wafer substrate. After hybridization among target DNA, 5′-end thiol-modified probe DNA and 3′-end thiol-modified capture DNA; a second layer of gold nanoparticle is built up through a self-assembly process between gold nanoparticles and thiol-modified end of probe DNA. When the applied voltage is the same, electrical current through multilayer gold nanoparticle structure is much greater than that through monolayered gold nanoparticle structure. Therefore, target DNA in sample solution can be detected through a significant degradation in electrical resistance from monolayered gold nanoparticle to multilayer gold nanoparticle structures. The concentration of target DNA in tested sample solutions ranges from 1 fM to 100 pM. The linear I-V curves of multilayer gold nanoparticle structures indicate the device proposed in this study can detect target DNA concentrations as low as 1 fM. Additional approaches are also suggested in this study to improve the sensitivity in DNA detection by using I-V measurements through multilayer gold nanoparticle structures.

KW - Bifunctional organic molecules

KW - DNA detection

KW - Gold nanoparticles

KW - Monolayer

KW - Multilayer

KW - Self-assembly

UR - http://www.scopus.com/inward/record.url?scp=14944345415&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=14944345415&partnerID=8YFLogxK

U2 - 10.1016/j.mee.2004.12.070

DO - 10.1016/j.mee.2004.12.070

M3 - Conference article

AN - SCOPUS:14944345415

VL - 78-79

SP - 546

EP - 555

JO - Microelectronic Engineering

JF - Microelectronic Engineering

SN - 0167-9317

IS - 1-4

ER -